Results 1 to 13 of 13
Like Tree2Likes
  • 2 Post By Leo.Bullterrier

Thread: VX Drivers seat stuffed and needs a replacment

  1. #1
    Leo.Bullterrier Guest

    Default VX Drivers seat stuffed and needs a replacment

    We have a larger framed mate who has just had the Lap Band fitted and we want to suprise him with a new seat for his VX S2 Acliam V6 sedan but all the seats weve already seen are also stuffed from normal wear and tear so I'm wondering what other model Commodore seat would fit the VX.
    Last edited by Leo.Bullterrier; 04-05-2011 at 11:45 PM.

  2. #2
    Ride
    VT Berlina

    Join Date
    Jan 2011
    Location
    Bundoora, Vic
    Posts
    43

    Default

    anything from vt-vz seats will fit in a vx, 99% sure.
    however, i'm not sure if you have to change the rails on the vy/vz seats to fit.

  3. #3
    db_notso's Avatar
    db_notso is offline diagnostic technician...
    Ride
    vt v6, mods(susp brakesetc...)

    Join Date
    Oct 2010
    Location
    sunshine coast, qld
    Posts
    979

    Default

    good on yas!~ depending where you are you could try a wreckers hotline (qld ABC wreckers)
    and they will source the correct ones for you, or retrim them (get a qoute on second hand ones)

    i've never tried to fit other models to a vx so unsure on what else might fit
    vy to vt needs rails been there scrapped that got buckets 400 $ set

  4. #4
    Leo.Bullterrier Guest

  5. #5
    Jonesy484's Avatar
    Jonesy484 is offline Quicksilver Club :)
    Ride
    VX I S

    Join Date
    Sep 2009
    Location
    Melbourne. Victoria
    Posts
    523

    Default

    deffs VT and VX and i think VY and VZ do to, but VT/X are better seats in my opinion
    Quote Originally Posted by DM 55 WA View Post
    venetians make me want to punch kittens

    Special thanks to B-Roca for my new sig

  6. #6
    som
    som is offline
    Ride
    vt executive

    Join Date
    Apr 2011
    Location
    thorneside qld
    Posts
    178

    Default

    when you do find your seat remember to disconnect the battery before you do the swap to eliminate the risk of having to take the car to the dealer to have air bag alarm reset.(been there)

  7. #7
    Leo.Bullterrier Guest

    Default

    I can get a left seat in perfect condition so I'm wondering can it be unbolted from the frame and used on the right side.

  8. #8
    Ride
    VX series 2 S-pack Auto 3.8

    Join Date
    Jul 2010
    Posts
    55

  9. #9
    Leo.Bullterrier Guest

    Default

    We now have a near new seat from a wrecked 80,000 klm vehicle and will fit the seat while Fred is away for work next week as I sold him the Commodore and I still have a remote but not the key so we'll surprise hime when he returns. He has also lost 19kgs and has 50 to go.

  10. #10
    Mick1988's Avatar
    Mick1988 is offline W.A. Cruise Moderator
    Ride
    Too many to list......

    Join Date
    Apr 2008
    Location
    Perth, Western Australia
    Posts
    577

    Default

    Side airbags are standard fitment in a VX acclaim so the seat you get has to have a side airbag. You can't use a passenger seat as the airbag will be on the wrong side and so will the seatbelt buckle and adjuster knobs. I hope you got a VX acclaim seat so the trims will match.
    VX2 Executive Sedan - 3.8L Auto (for now)
    VT SS Sedan - Supercharged V6 Auto (Genuine L67 SS)
    VN SS Sedan - 5.0L 5 Speed Manual (Currently Balga spec waiting for panel and paint)

  11. #11
    Leo.Bullterrier Guest

    Default

    I can't see where the air bags are in our VX and I can't see where they are on his either, show us via this picture where the air bags are located.

  12. #12
    Calaber's Avatar
    Calaber is offline Nil Bastardo Carborundum
    Ride
    CG Captiva SX

    Join Date
    Nov 2007
    Location
    Lower Hunter Region NSW
    Posts
    2,434

    Default

    The airbag is located in the bolster on the side of the seat back, immediately in front of and just above the knob used to adjust the lumbar support. It isn't visible because the seat is designed so that the airbag is completely concealed, for a neat appearance. Sorry, but I don't know how to edit the picture to illustrate it more clearly.

    I think it is possible to swap the left and right hand seats over, but you will need to do a fair bit of swapping of parts. I think the factory used the same basic seat cushion and backrest frames for both sides, and simply fitted left or right hand components as required.

    The rails will interchange, so that takes care of the seat belt and seat mountings. As far as changing other parts over, I think the only parts that differ from left or right are the external trim pieces like the plastic covers. If you strip the new seat down, I think you might find that the upholstery for the seat cushion is already perforated to suit left or right hand fitment, which means the holes to allow the plastic trims to clip and screw on will already be there. The holes that aren't used are covered by the plastic, or concealed once the seat is fitted. I could be wrong, but even if I am, it would be simple enough to cut the holes out carefully to fit the plastic trims from the driver's seat to the passenger's seat.

    The only other things to worry about are the airbag and the lumbar support. I know the lumbar support can be unbolted and reversed as I've done it myself when replacing a backrest that had a cracked frame, and I'm also pretty sure that the mounting points for the airbag are fitted on both sides of the seat backs, so they can be used on either side of the car. The airbags are probably made in left and right hand fitments, so you will need to fit the airbag from the old seat.

    If this works out, let us know how it went.

  13. #13
    Leo.Bullterrier Guest

    Default

    No ned as we now have a right seat from a VX Monaro that was written off with 80,000 klmns on the clock and the seats are like new $400.00


Similar Threads

  1. Project RejuVeNate~ Front passenger seat changed to drivers seat?
    By Budmulla in forum VN - VP Holden Commodore (1988 - 1993)
    Replies: 2
    Last Post: 03-01-2011, 06:36 PM
  2. [NSW] WTB VY Drivers Seat
    By MA7789 in forum Swap / Wanted to Buy / Trade
    Replies: 0
    Last Post: 21-10-2010, 05:15 PM
  3. [NSW] WTB: VY SS cloth seat trim for drivers seat.
    By wayneg in forum Swap / Wanted to Buy / Trade
    Replies: 0
    Last Post: 05-08-2010, 09:23 AM
  4. T drivers window stuffed??
    By mynameisearl in forum VT - VX Holden Commodore (1997 - 2002)
    Replies: 6
    Last Post: 05-03-2010, 10:56 PM
  5. Stuffed Seat
    By fu2 in forum VN - VP Holden Commodore (1988 - 1993)
    Replies: 5
    Last Post: 18-07-2005, 01:50 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72