Vt front bumper

[Dee jay]

Hey, do i have to take the front bumper off to get the front lights? If so is it hard? And how are the spot lights wired? Do they just clip off? Cheers

[edals]

Hey Mate.

Yes you do need to remove the front bumper to get to the front head lights.
Cannot be to hard to remove the front bumper, i have only removed a rear one and was quite easy
As for the spotties they should just have connectors on the back of the.

[Dee jay]

Cheers again

[som]

from memory,2 screws at the top (either side of the bonnet catch ),1 or 2 on each side where the bumper wraps around the wheel arch.then there are hidden clips behind the bumper that you have to release ( someone may have a description of the best way to lift/release the bumper from these clips ). you can do it on your own but much easier with 2 people. don't remove the grills.sorry i have no idea about fog lamp wiring.

[philba]

the wiring for the fog lights will have a clip on them at the back of the lights
as for taking the bar off, there is 3 bolts/screws across the top above the grill, and 2 screws in each wheel arch, 1 at the top of the bar and 1 at the bottom,and then its just a case of pulling the bar out of the clips that hold it in place

[Dee jay]

Thanks all ill give it a try tomoro ha

[graham7773]

Don't forget the two plastic scrivets under the bar that hold the bar on to the support