jacking up my car

[Killr6]

Hey guys ive got a 99 vt with a clubsport kit on it. last week i got a flat tyre and when i jacked the car up to put the stocky on, it pushed the side skirt into the rear door and damaged my paint on my side skirt. i only have the stocky hand jack. ive checked around the car and cant see how i jack the rear end up again without damaging the sides. can anyone help me any idea on how to do it, with out damaging my car?

thanks dan.

[slowandlow]

did you use the proper jacking point where the little cutout bits are?
if so, only other way i can think is to use a trolley jack and lift it by the diff housing onto stands

[Capacious]

Just attach the jack to the chassis rails about 6 inch in front of the back wheels... unless your kit covers the rails? If it does I would back the car up on some ramps and trim the kit back with an angle grinder.

[MR_VX]

Ive also wanted to know where to lift the back from with a trolley jack. so under the diff yeah?

[Drewie]

From memory it shows you in the owners manual where the trolley jacking points are.

[acarmody]

Ive also wanted to know where to lift the back from with a trolley jack. so under the diff yeah?

Yep the diff centre.