dash testing

[jayvt]

i need to know how you do that thing where u get ur rpm needle to 3000 and your speedo to 100, fuel and temp to half. ASAP please

[HoZy]

[lufkin]

have you tried searching?

[m62vpute]

i need to know how you do that thing where u get ur rpm needle to 3000 and your speedo to 100, fuel and temp to half. ASAP please

Slap a set of diff gears in the rear of it
put half a tank of fuel in
disconnect your thermos and run it for a while till you can take a photo or whatever

[oska]

i need to know how you do that thing where u get ur rpm needle to 3000 and your speedo to 100, fuel and temp to half. ASAP please

press and hold the MODE and the UP arrow buttons before starting your car then cycle the MODE button until everything lights up

[wrx884]

dont think u'll have that option in ur 99 VT exec but if u do let us know.

[oska]

dont think u'll have that option in ur 99 VT exec but if u do let us know.

applies to all VT VX and if you hold the MODE and down arrow you get other less useful info

[GEN3RATD]

was under the impression that it worked in any VT/VX. as stated hold mode and up when you start the car, then just keep pressing mode and it will happen.

as a warning dont do it while you are driving though

[wrx884]

nope early model VTs didnt get that option 4 some reason, u get the check warning lights option where it should b but not the needles. mine cant do it and the guys who ive done conversions 4 so far with early models couldnt do it either. its a pain a bit coz wen i take the needles off i have 2 rely on where the needles were originally on the cluster that they r positioned in the right spots, where as other models i can test the needles and recalibrate them at the same time.

[GEN3RATD]

in his info he says he has a series 2 so he should be fine?

[MR_VX]

when i had a single window cluster it worked but now i have a 3 window cluster it doesnt do it.

[wrx884]

in his info he says he has a series 2 so he should be fine?

mayb thats y i wasnt sure if it would but being a series 2 it may or may not work.

when i had a single window cluster it worked but now i have a 3 window cluster it doesnt do it.

wat was the LvL 3 cluster from? sounds strange so far even the early models VT L3 clusters have it. All VX's work tho which is y urs worked b4.