Removing a VX Exec Spoiler?
Taking off the spoiler on my VX,
The wires for the brake light on the spoiler is mind F*&@ing me.
Advice on how to undo this thing would be lovely.
Don't want to cut anything i don't have to.
Donating Member
If you are talking about the 2 joiners, they unclip and fold out. If you look at the joiner on the left in your photo you will see the part on the left that is sticking out a bit, just use your thumbnail to open it up like a hinge.
MY RIDE
I thought I was wrong once but I was mistaken.
They're just scotchlocks right? Taken apart like what ^^^ said. Shit connectors that shouldnt be used!
Before i posted i had opened the hinge part, but it *looks* like there is a peice going from one side to the other locking the wires in place. Do you just pull hard and break that part? or does it just come loose or something.
Either way, your help is appreciated
Last edited by 666-GMH; 02-08-2011 at 08:38 AM. Reason: Added the picture
Donating Member
Just open that part up like a hinge as well, then pull the wires out of the slots in the small metal plate. Tape up the exposed part of the wire that is remaining in use.
I thought I was wrong once but I was mistaken.
<3
Thanks for your help on that!
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote