Popped the bonnet and seen that the powersteering hose has been sitting on the radiator hose and is wearing a groove into it. Before thing gets ugly has anybody else had this problem and how do you solve it?
"Yes, let's work as a team and do it my way"
not sure which hose you mean but something is obviously out of line lol, id just move or carefully bend whatever needed to give it some clearance if it was possible without DAMAGING anything-or if its the rubber power steering hose maybe you could put a new longer one in or shorten it or something to take up slack or give slack ect, you can buy power steering hose by the metre at car parts stores...
Will have a look tomorrow night mate. Hopefully it works. If not i'll have to work something else out
"Yes, let's work as a team and do it my way"
Maybe you could use a cable tie to move the power steering hose away from the radiator hose.
Mine power steering hose rubs on the bottom side of the top radiator hose
Try loosening the radiator hose clamp, then give the hose a bit of a twist so they dont touch and then tighten up the hose clamp again.