Service reminder reset not working.

[Justachick]

Hi all,
I had a service on my vt today, when i got home i attempted to clear my service reminder, however its not resetting.
I held the up and down buttons while turning on the ignition, 'reset' was displayed, i pressed mode, my service reminder was flashing, i held the up and down buttons again until it beeped, it stopped flashing but didnt clear. When i turned my ignition off, then on again, the service reminder was still there.
Any ideas?

[88GreenVN]

If the car has stored error codes in the VZ - it wont reset untill cleared - maybe the VT is the same??

[Not_An_Abba_Fan]

Sometimes the buttons are temperamental, try doing it with less pressure on them.

[BlackVXGTS]

Minor revisions to the instrument cluster effective from VT Series II start of production resulted in a revised the reset procedure for these vehicles.

VT II Service Reminder Reset
1. Turn the ignition OFF.
2. Hold down the trip computer ⇑ and ⇓ buttons together.
3. Turn the ignition ON while still holding down both buttons.
4. After approximately 3 seconds, release both buttons.
5. Press and release the “MODE” button, once only. The service due screen appears on the
display. (Do not hold this button down for an extended time period).
6. Press and hold both ⇑ and ⇓ buttons for approximately 3 seconds, until a beep is heard.
7. Release both buttons.
8. Turn ignition OFF.

VT I Service Reminder reset:
1. Turn the ignition OFF.
2. Hold down the ⇑ and ⇓ mode buttons on the trip computer together.
3. Turn the ignition ON (mode buttons still depressed).
4. Release mode buttons after approximately 3 seconds.
5. Use the mode button to step through trip computer screens until the service due reminder screen appears on the LCD (usually only one press).
6. Press and hold both the ⇑ and ⇓ mode buttons until an audible beep is heard (approximately 3 seconds).
7. Turn the ignition OFF.