New motor won't start

[vtv6]

Hey guys just put my new motor in and it turns cranks over fine but won't start I have a new memcal from mace to go with my cam and is there a certain way it has to be put in? and wold that be why it won't start if its in the wrong way cheers

[evotime]

..........................................

[accentstencil]

Is the security light flashing when you try to start it? Are you using the same ECU?

[vtv6]

How do I check if the injectors pulsing?

[accentstencil]

Why don't you respond to the questions that have been asked?

[vtv6]

sry didn't see the question wheres the security light and yea using the same ECU just put new mescal in it

[accentstencil]

sry didn't see the question wheres the security light and yea using the same ECU just put new mescal in it

The security light is in the mode switch (trip computer).

[vtv6]

hey I checked the error codes and it has error code 46

[accentstencil]

46 is Crank Angle Sensor (engine will not start). Since you have replaced the CAS it might be a bad connection or the DFI module.

[CapriciousWL]

Here you go - it relates to a VX question, but a simple search gives this:

help with code 46

Good luck!!!

[vtv6]

Cool thanks guys will check it out in the morning