Vt v6 s1 acclaim

[Shaun m]

Ok, I'm buying 20inch rims, that are for Holden, just wondering what I have to change to fit them. I know I have to change to adjustable camber bar to straighten the rear. But will these tires grind my guards? Thanks

 

[vx_commodore]

How low are you?
If you're on the low side. You will need to roll you're gards.

 

[Shaun m]

How low are you?
If you're on the low side. You will need to roll you're gards.

Standard untill I buy that bar, so I can lower it on sl's, due to IRS. If it is lowered, rolling the guards out still necessary ? Also how much does this cost? Will it crack the paint at all ?

Edit: I mean is it necessary to roll guards, as a standard hight. Not low at all. Will it look doody not lowered though ? -.-

 

[vx_commodore]

Standard untill I buy that bar, so I can lower it on sl's, due to IRS. If it is lowered, rolling the guards out still necessary ? Also how much does this cost? Will it crack the paint at all ?

Standard height you should be ok.
I got mine done for $40 each corner.
No paint damage, They do it propley.(well most place's)
If you do it you're self, And don't do it right, You may crack the paint.

 

[Shaun m]

Standard height you should be ok.
I got mine done for $40 each corner.
No paint damage, They do it propley.(well most place's)
If you do it you're self, And don't do it right, You may crack the paint.

Ok, will it look **** not low on 20s? Or better just to pay, then lower it ?

 

[vx_commodore]

Mehh, I think the lower it is the better the look

Get the rim's first, Then see where you're at with ho much room you have