blown vx ss foglight HELP

[tufvxss]

hey guys i noticed the other nite that one of my fog lights wasn't working so i took the front bar off and opened up the foglight and found the the bulb was blown. I tried getting the bulb out to replace it but it seems that its soldered in there please dont tell me i have to buy a whole brand new foglight just for a 50c globe please someone help me

[keza87]

They do come apart to replace the bulb. I think its a H1 bulb but can't really remember

[Nat_emeny]

Hey mate, Yeah they come apart, you just undo some screws on the back and then you can replace the globe, and yeah think its and h1 but i'm not 100%

[tufvxss]

hey guys yeah i pulled the light apart and got to the globe but it dosen't wanna cum out I'l take sum pix of it 2moz to show you wat the go is cheers

[keza87]

Hmm strange.
Just had a look at mine.
You take the metal ring off and the glass part should come out and then on the back the globe just clips in.
You will have 2 wires as well. The black one which is attached to the metal back and a white wire that goes into a connector surrounded by insulation stuff.
The globe is actually a H3 bulb.

[tufvxss]

hey yeah its a h3 bulb i took sum pix i took the silver surround off n took out the bulb but i just cant seem to remove it iv tried unclipin things pulling things but it just wont cum hey keza87 did u get the bulb out? its really sh*tting me it looks so simple

[Jim Bob]

You take it off by pulling on the blue cord connected to the bulb. It comes apart underneath the white stuff just bellow the zip-tie in the second pic.

[keza87]

^^^^ What he said.
The wire is soldered onto the bulb. the actual bulb doesn't come out of the mount.