G'day,
Just got three k&n panel filters part #33-2116 in the post today and it works out they are not for my car(I drive a VR) they're for VT to VX.
So I thought maybe someone or multiple someones could make use of em.
Anyway, I know they're about 90 bucks brand spankers, and apparently these ones are only about 10k old.
Drop us a line and make me an offer, I'm not lookin for much.
My Ride:
'94 VR V6 BT1. 15" roh with 225's, stocky with bellmouth removed, OTRCAI, homemade airfilter, B&M Stage1 shiftkit, .490 boost valve. Corvette servo.
Lappy runnin EFILive in a semi stock interior.
WANTED: VN/VP/VR/VS Standard
Memcals.
WANTED: Standard front bar from VR/VS. Prefer alaskan white but will take anything.
Newcastle/Maitland/Central Coast.
Email me
hyp3r4l3rt@hiptop.com.au
so these ones are used? is it? how much do u want for one?
Ok, resistered post is 15.75 to most places(that's what it cost me from qld to nsw)
How's 55 including postage?
Anyway drop us a line
My Ride:
'94 VR V6 BT1. 15" roh with 225's, stocky with bellmouth removed, OTRCAI, homemade airfilter, B&M Stage1 shiftkit, .490 boost valve. Corvette servo.
Lappy runnin EFILive in a semi stock interior.
WANTED: VN/VP/VR/VS Standard
Memcals.
WANTED: Standard front bar from VR/VS. Prefer alaskan white but will take anything.
Newcastle/Maitland/Central Coast.
Email me
hyp3r4l3rt@hiptop.com.au
Ok, how about 45
My Ride:
'94 VR V6 BT1. 15" roh with 225's, stocky with bellmouth removed, OTRCAI, homemade airfilter, B&M Stage1 shiftkit, .490 boost valve. Corvette servo.
Lappy runnin EFILive in a semi stock interior.
WANTED: VN/VP/VR/VS Standard
Memcals.
WANTED: Standard front bar from VR/VS. Prefer alaskan white but will take anything.
Newcastle/Maitland/Central Coast.
Email me
hyp3r4l3rt@hiptop.com.au
is it used for 10.000k's?
40 bucks each, honestly they are no use to me, I'm not tryin to rip anyone off.
They are part number 33-2116 with an embossed k&n on the same side. Thet are in good condition, no tears in the cotton or steel mesh.
I'm just tryin to make enough to buy the proper filter for my car.
My Ride:
'94 VR V6 BT1. 15" roh with 225's, stocky with bellmouth removed, OTRCAI, homemade airfilter, B&M Stage1 shiftkit, .490 boost valve. Corvette servo.
Lappy runnin EFILive in a semi stock interior.
WANTED: VN/VP/VR/VS Standard
Memcals.
WANTED: Standard front bar from VR/VS. Prefer alaskan white but will take anything.
Newcastle/Maitland/Central Coast.
Email me
hyp3r4l3rt@hiptop.com.au
dude u could go 10.50 express and its registered up to 3 kg
No-one wants a k&and filter for 40 bucks postage INCLUDED in price?
That's 40 bucks and you'll have it at your doorstep within days.
My Ride:
'94 VR V6 BT1. 15" roh with 225's, stocky with bellmouth removed, OTRCAI, homemade airfilter, B&M Stage1 shiftkit, .490 boost valve. Corvette servo.
Lappy runnin EFILive in a semi stock interior.
WANTED: VN/VP/VR/VS Standard
Memcals.
WANTED: Standard front bar from VR/VS. Prefer alaskan white but will take anything.
Newcastle/Maitland/Central Coast.
Email me
hyp3r4l3rt@hiptop.com.au
I certainly would but I just bought one about 3 weeks ago. Cost me around $90 so I can't see why they aren't selling at $40.
MY RIDE
I thought I was wrong once but I was mistaken.
Yeh man, pm me I'll give you my phone number and bank account details.
My Ride:
'94 VR V6 BT1. 15" roh with 225's, stocky with bellmouth removed, OTRCAI, homemade airfilter, B&M Stage1 shiftkit, .490 boost valve. Corvette servo.
Lappy runnin EFILive in a semi stock interior.
WANTED: VN/VP/VR/VS Standard
Memcals.
WANTED: Standard front bar from VR/VS. Prefer alaskan white but will take anything.
Newcastle/Maitland/Central Coast.
Email me
hyp3r4l3rt@hiptop.com.au
got any left? ive got VU ute should fit that ey? pm me thx
Ok, they are just the panel, not the whole box.
They are a direct replacement for the standard panel filter for VT VX etc.
they are used, I was ensured that they were 10,000 k's old (for what that's worth).
I still have all three.
If there is anyone in the newcastle/hunter area and maybe wants to frade me one of these for something?
Anyway, I have had a bit of interest, please pm me and request bank account details. After deposit made I will send via express post asap.
What I would love to trade for is a plenum from a series 2 buick motor.
Or a set of vn series one valve covers.
But cash is ok.
40 bucks including postage or trade for parts.
I am not married to the requested parts I will consider anything.
Email me.
Hyp3r4l3rt@hiptop.com.au
My Ride:
'94 VR V6 BT1. 15" roh with 225's, stocky with bellmouth removed, OTRCAI, homemade airfilter, B&M Stage1 shiftkit, .490 boost valve. Corvette servo.
Lappy runnin EFILive in a semi stock interior.
WANTED: VN/VP/VR/VS Standard
Memcals.
WANTED: Standard front bar from VR/VS. Prefer alaskan white but will take anything.
Newcastle/Maitland/Central Coast.
Email me
hyp3r4l3rt@hiptop.com.au
One wants to trade for a set of VT series 2 blinkers (side repeaters)
Anyway, drop me an email.
Hyp3r4l3rt@hiptop.com.au
My Ride:
'94 VR V6 BT1. 15" roh with 225's, stocky with bellmouth removed, OTRCAI, homemade airfilter, B&M Stage1 shiftkit, .490 boost valve. Corvette servo.
Lappy runnin EFILive in a semi stock interior.
WANTED: VN/VP/VR/VS Standard
Memcals.
WANTED: Standard front bar from VR/VS. Prefer alaskan white but will take anything.
Newcastle/Maitland/Central Coast.
Email me
hyp3r4l3rt@hiptop.com.au