Broken Glove Box in the VX

[Chris The Slayer]

Has any1 elses glove bx broken in their car, it is basically not in use because i just clipped it on and the back of the glovebox is basically hanging. Does anyone know how to fix it, mayb even a DIY job?
Cheers

[accentstencil]

There should be a big round plastic pin in the glove box that has come out. It goes in the corner and it may be a bit hard getting the holes to line up.

[joebloggs]

The glovebox is basically 2 pieces of plastic, the outer and inner and are screwed together around the edges. Holden sells the inner part for about $35.
All you have to do is put it together, then place it is position. The bottom left corner goes into a loop, whilst the right has the pin. Make sure you havent broken the loop off first.

[adam69]

The glovebox is basically 2 pieces of plastic, the outer and inner and are screwed together around the edges. Holden sells the inner part for about $35.
All you have to do is put it together, then place it is position. The bottom left corner goes into a loop, whilst the right has the pin. Make sure you havent broken the loop off first.

Yes check the loop that the glove box goes into,on the left.I payed under $20 for the glovebox piece and about $30 for the part that screws up into the dash.

[Chris The Slayer]

Yer well its the left side thats broken, the loop, so ill have to guy nuy the inner part from holden. When i went n got my car all servicd, the idiot sed it culdnt be fixed?? haha thats why i came to the greatest website on earth

[adam69]

Yeah mine was broken too.Holden have em and they arnt too hard to replace.Be VERY careful fitting the glove box back in to the new loop part.Its a tight fit and mine sounded like it broke when mine popped in(crapped myself).Good luck with it.