VX Series 2 Executive electric window conversion.

[Woodfire]

Hi Guys, I have a question for you all.

I have a VX S2 Executive wagon and replaced the manual windows with electric ones from a wrecked Statesman. I installed the door looms, door actuators, switches and plugged in a fuse and relay. The problem is that my Drivers window does not operate Am I missing something? I have even swapped out the window switch on the console with another with the same results.

Any ideas would be greatly appreciated.

Thanks

Woodfire.

[accentstencil]

Are you sure the motor on the regulator works? Try connecting 12 volts directly to the motor to see if it works.

[Woodfire]

It's sorted thanks guys. Turns out I need to look harder. I didn't realise that the drivers door used a separate relay to the rest of the car!! $7 later and all is good

[accentstencil]

It's sorted thanks guys. Turns out I need to look harder. I didn't realise that the drivers door used a separate relay to the rest of the car!! $7 later and all is good

I was going to mention that relay but I went out to my car to have a look and realized that my car has a space for the relay but no relay, not even the connectors where the relay goes but my driver's window works as it should. So I don't know what's doing there.
Edit: After comparing wiring diagrams it appears the Berlina, Calais and Statesman don't have a drivers window relay.