vx calias garnish

[Archers]

ay guys just got myself a vx Calais garnish and was wonder has anyone hooked the wires up so the break lights work on them? there are 3 wires and instead of wiring it in to the wiring harness was thinking of making it a slave off the other light, IE my wing light. has anyone done this? any help appreciated and or a diagram? thanxs in advance Scott

[roger05]

Hey man you said there are three wires one is for brake light positive, one is for park light positive, and the other is earth. You could run 2 power wires up from your tail light and the earth should work srewed straight into the boot lid. Or you could prob buy the vx calais loom from holden, im guessing it will plug straight into the vt plug. Making your own loom is pretty easy, check the wire colors in the boot may even be the same as the ones in the garnish?? then just run the wires up through the same hole as your wing light wire.

[Archers]

Hey man you said there are three wires one is for brake light positive, one is for park light positive, and the other is earth. You could run 2 power wires up from your tail light and the earth should work srewed straight into the boot lid. Or you could prob buy the vx calais loom from holden, im guessing it will plug straight into the vt plug. Making your own loom is pretty easy, check the wire colors in the boot may even be the same as the ones in the garnish?? then just run the wires up through the same hole as your wing light wire.

thanxs mate i will have a look at that, i can get the loom but its the whole body loom that goes through the car and looks hard so i didnt want to go that way

[dijm8]

i'll show u mine scott, mite give u an idea how its done... if not just wire it into ur lights already, like u said

[Archers]

i'll show u mine scott, mite give u an idea how its done... if not just wire it into ur lights already, like u said

I'm scared i will blow the wiring on the car thats why i need the colors to connect to man

[dijm8]

lol yeh b carefull dnt wanna blow up the car now hahahah

[roger05]

RVX219 go buy your self a test light, that will show you wat wires you need to cut and shut. but basicly your standard brake light has 3 wires going to it same as your new garnish so you only have to run 2 power wires in.

[Archers]

RVX219 go buy your self a test light, that will show you wat wires you need to cut and shut. but basicly your standard brake light has 3 wires going to it same as your new garnish so you only have to run 2 power wires in.

well man i had a look and to of the wireing colours are the same on the garnish as they are on the lights so that leaves one! earth?.

[roger05]

well you should be able to screw the garnish earth wire straight into the boot lid with a self tapper screw. It should earth out through the hinges back to the battery.

[Archers]

well you should be able to screw the garnish earth wire straight into the boot lid with a self tapper screw. It should earth out through the hinges back to the battery.

thanxs for the imput i will try on the weekend hopefully works a treat

[Infin8]

i replaced my globes with LED lights.... BRIGHT!!!! i love it, haha!

[roger05]

Hey RVX219, u live in adelaide?? might be able to give u a hand if you get stuck

[Archers]

Hey RVX219, u live in adelaide?? might be able to give u a hand if you get stuck

yeah m8 live just off port rd

[roger05]

howd ya go with the wires??

[Archers]

howd ya go with the wires??

just finishe m8 worked great i will get picks up later thanxs for the imput