Wagon rear doors same as sedan?

[Fletch_QLD]

Looking for door trims - are wagon rears the same as sedan?

Also - do vy/vz fit vt/vx?

Thanks.

[Dayvo]

All wagon rear doors have a different window frame to the sedans.
VT/VZ doors are interchangable ,

[accentstencil]

Looking for door trims - are wagon rears the same as sedan?

Also - do vy/vz fit vt/vx?

Thanks.

Even though the top part of the rear doors are different in the wagon, the door trims are the same.

[STEALTHY™]

Follow on from that, the metal is the exact shape. So its possible (depending on how much effort you want to put into it) to, for example, replace a damaged sedan door, with a wagon door, using the sedans frame.

[Fletch_QLD]

Soo confusing - sounds like wagon door trims are maybe/yes/possible for sedan rear doors ...

[STEALTHY™]

Not confusing at all. The metal is the same, meaning the door trim is the same. My door trims aren't higher than my window line.

[Dayvo]

Follow on from that, the metal is the exact shape. So its possible (depending on how much effort you want to put into it) to, for example, replace a damaged sedan door, with a wagon door, using the sedans frame.

You could do it if you were game enough. First you would have to remove the old ones which would be a big job in itself.they are spot welded and mig welded , so you would have to drill and grind them out .If they are like the VB/VL doors they have 12 spot welds and 4 mig welds . they you would have to be spot on welding the new ones in as they are held together in a jig before welding .

[Fletch_QLD]

Not confusing at all. The metal is the same, meaning the door trim is the same. My door trims aren't higher than my window line.

Thanx mate - good to go then

cheers

[STEALTHY™]

You could do it if you were game enough. First you would have to remove the old ones which would be a big job in itself.they are spot welded and mig welded , so you would have to drill and grind them out .If they are like the VB/VL doors they have 12 spot welds and 4 mig welds . they you would have to be spot on welding the new ones in as they are held together in a jig before welding .

As i said, depends how much effort you want to put in. Possible nonetheless