Results 1 to 9 of 9

Thread: Finally Fixed That Front End Shudder

  1. #1
    Ride
    VX 'S' S1

    Join Date
    Apr 2005
    Location
    South East,Victoria
    Posts
    1,360

    Default Finally Fixed That Front End Shudder

    Just quickly , I have been trying to get rid of my front end ( so i thought ) shudder for a couple of months now . My VX used to shake really bad at 70 kay and above under brakes .I have replaced the front pads and rotors had wheels balanced changed the radius rod bushes . I finally went to a brake place and they put the car on the rollers to check it . They put the front wheels on the rollers and checked the front brakes at various speeds and they were ok . Then they done the same to the rear wheels and when they applied the brakes at 80 kays the car started to shake .So two rear rotors and a set of pads later all is sweet. The mechanic said its amazing how many people come in here with what they think is warpped front discs when the problem is with the rears.
    So if any of you guys have a VT VX with the same problem get it checked out first before you start spending $$$$$$s it might be your rear discs
    there are three types of people in the world , those who can count and those who can't

  2. #2
    burnz's Avatar
    burnz is offline dah dut dut da dah
    Ride
    2010 CRUZE Diesel

    Join Date
    Jun 2005
    Location
    springfield
    Posts
    1,360

    Default

    problem's with the rear!!
    as i said before "look at the gear stick more movement under brakes"
    Research has shown that men usually sleep on the right side of the bed.
    Even in our sleep we happen to be right.
    Powered By Garrett

  3. #3
    Juztin's Avatar
    Juztin is offline Bigmacs everywhere
    Ride
    VT II 99', S Pack.

    Join Date
    Sep 2008
    Location
    3156
    Posts
    124

    Default

    Cheers mate i also have a shudder at that speed.
    Its an annoyance but i dont have the money to get it fixed.

    Apart from being annoying it can't damage your car or create any more problem can it?

    Sorry for the bad question =P...but im still learning haha

  4. #4
    NVE_069's Avatar
    NVE_069 is offline Vx Calais / Ve Berlina
    Ride
    Vx Calais LS1 / Ve Berlina V6

    Join Date
    Mar 2005
    Location
    Brisbane
    Posts
    826

    Default

    Got this problem atm i got 2 front rotor's fitting them friday now you got me worried lol. its ok I was gunna change them all anyways so if this is the case so be it unless I know ill have all new brakes and rotor's
    Always In Construction Mode!!!!!

  5. #5
    Ride
    VX 'S' S1

    Join Date
    Apr 2005
    Location
    South East,Victoria
    Posts
    1,360

    Default

    Quote Originally Posted by Juztin747 View Post
    Cheers mate i also have a shudder at that speed.
    Its an annoyance but i dont have the money to get it fixed.

    Apart from being annoying it can't damage your car or create any more problem can it?

    Sorry for the bad question =P...but im still learning haha
    Could be a problem if you have false teeth lol, But seriously anything that shakes your car can't be good for it .
    there are three types of people in the world , those who can count and those who can't

  6. #6
    Juztin's Avatar
    Juztin is offline Bigmacs everywhere
    Ride
    VT II 99', S Pack.

    Join Date
    Sep 2008
    Location
    3156
    Posts
    124

  7. #7
    NVE_069's Avatar
    NVE_069 is offline Vx Calais / Ve Berlina
    Ride
    Vx Calais LS1 / Ve Berlina V6

    Join Date
    Mar 2005
    Location
    Brisbane
    Posts
    826

    Default

    Just changed the front rotor's and the damn thing still shakes hahaha will be doin the back anyways but thought it was the fronts. No money lose tho as I was doin all four.
    Always In Construction Mode!!!!!

  8. #8
    Ride
    VX Calais 01 3.8lt Ecotec

    Join Date
    Jul 2006
    Location
    Melbourne
    Posts
    1,216

  9. #9
    Ride
    VX 'S' S1

    Join Date
    Apr 2005
    Location
    South East,Victoria
    Posts
    1,360

    Default

    Just a quick note , Don't forget to back off your handbrake if you are having trouble geting the rotors off. The rotor has two rubber plugs in them . turn the rotor around till the rubber plug is at the bottom then pull the plug out and insert a small screwdriver to back off the adjusting screw.
    there are three types of people in the world , those who can count and those who can't

Similar Threads

  1. I've finally fixed an annoying coolant leak V6 commy
    By auc05l in forum VR - VS Holden Commodore (1993 - 1997)
    Replies: 3
    Last Post: 14-10-2006, 04:37 AM
  2. front strut shudder...
    By vnstu in forum VN - VP Holden Commodore (1988 - 1993)
    Replies: 6
    Last Post: 15-06-2006, 06:47 PM
  3. Finally fixed the throttle body to open fully
    By greenfoam in forum VN - VP Holden Commodore (1988 - 1993)
    Replies: 6
    Last Post: 30-10-2005, 01:36 PM
  4. Front end shudder at speed
    By Pretender in forum General
    Replies: 5
    Last Post: 28-10-2005, 08:57 PM
  5. front shudder
    By chevy_big_block_bro in forum VN - VP Holden Commodore (1988 - 1993)
    Replies: 6
    Last Post: 03-10-2004, 08:47 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72