Might have ran over it ? I didnt even notice it lol I thought u drew a O on the seat :P
Always In Construction Mode!!!!!![]()
Looks to me like a piece of fencing wire your car must have kicked up off the road as you drove over it. It looks too thin to be the wire that goes behind your hub cap. Same thing happened to me years ago strangely enough.
It's one of your piston rings.
I'd say by the colour, it's out of #4 cylinder.
Easy to re-install, simply remove air filter and place in air filter box. Fill box to brim with 'Morey's Upper Cylinder Lubricant', this will help it slide past the intake valve. Remove #4 sparkplug lead and start car, hold at 4,000rpm for 10 minutes then switch off, allow to cool.
lol. sorry about that. just looks like a random piece of steel.
You do realise that there are some people on here that would actually do that.....
The same people who shouldn't be driving on the roads in the first place? :P
hahahaha yer u can tell anyone to do anything if they think your being serious a mate asked how to wash clean his sump out of his 4by, i said fill it with detergent then hose it out, caught him in the nick of time
+1 for random metal you just happened to run over.
Ran over a pair of pliers once, went through the floor just in front of where the seat bolts to, was dragging down the rd till I realised. imagine what that could've done if it was the tank it hit. kept the pliers and now in my tool box.
sorry about the random reply.
where the pliers stanley?
*LaUgH nOw CrY lAtEr*
Hence this at the bottom of the post.
Yes I do realise there are people that would believe that and it saddens me to no end.
But I know the difference and that's all that matters.
Back to topic, I still think it's a random piece of steel, chuck her in the bin. Or use it to pick your teeth, whatever blows your skirt up.
Yeah i thought it may have been random, but im not too mechanically minded to the extent people on here are, and better safe then sorry.
once had a truck come in with a shaky wheel....turns out someone had left a hammer on the inside when it was fitted up....nuffin to do with this post i know but meh...im just being random lol....
Does your handbrake still work? Can't get a clear pic of it but sort of looks like part of a cable
I say its a random piece of wire...
If it was something important you would have known by now.
Where was the wire sitting when you pulled over?
[Windows OS detected... Please standby for errors]
The Blue One
Wire support out of one of Pamela Anderson's bras maybe?
Ive seen one of these before.
It's the smaller of a set of nose rings as worn by a lebanese from the gong. Better check your exhaust for embedded flatbread and make sure theres no cheese stuck on the radiator it reeks after a while.
Id also hose the gearbox before it makes you fully siiiiiiiik
Aw man, but i just had the flux capacitor serviced...
They said it would run on tacky rubbish so i went to the local wreckers and started getting pieces off mid 90s Fords![]()