altezza tail light problems help!!!

[Holden Chick]

Hi
I just had my new altezza head and tail lights installed. Head lights are all in work good and look good to.

The tail lights are in but the reversing light stays on all the time even when in drive and I now have no brake lights (brake light eye to the back shelf included) checked the fuse and is all fine and working?

any ideas, thought it may be the brake switch but this wouldnt cause the reversing light to stay on all the time?

Help??????

[Static89]

whoever installed them suck, take it back and slap the bastards

[Holden Chick]

lol........it does look that hard the harness just clips into the white clip right? maybe the wiring harness is faulty ?

[social]

OR MAYBE, someones put the wrong type of bulb in? It happens... easy fix just double check whats in..

[chrism182]

Pull it out and check the bolbs. They could be in the wrong place.

[Holden Chick]

Cheers guyz will give it a shot and let ya know

[Holden Chick]

4give my ignorance just so over the hole lights issue with the vt, if the bulbs are in the wrong place or not the right type wouldnt that mean that nothing would work?????? and y would, it stop my brake light eye at the back shelf from working? they guy who installed it put the orange bulb up top (indicator obviously) and other bulb down the bottom, it wouldn't the wiring harness would it?

Thinking i should have doine it myself and i would be having these problems. Any ideas? im out

[WogBoyz]

i had a sameish problem with mine, expect my lights leaked water when it rained lol so and then had one or 2 bulbs die, then i got the wrong bulb so had to take it back ect and the story goes on lol

they were a pain in the butt

btw when i put the wrong bulb in some of my lights didnt work and indactor fashed really fast, so u mite have the wrong bulb in

[chrism182]

Do all lights actually work? Because those lights are designed for VX looms, so you might need to replace your VT looms with VX looms.

[Holden Chick]

The reversing light works obviously cuz its always on and, the head lights work. just not the tail lights. The lights I got weren't the monaro style but the other style to suit a vt. If that makes sense

[wrx884]

he means is there power in the tail light looms??? use a test light and see if u have power in ur looms (not just the reverse socket). wat sort of altezzas were they the LED type? or just the standard type? the looms shouldnt b designed 4 the VX as mine werent so y would urs b any different? the only problem i had with mine was that only 1 reverse light didnt work and that was coz there wasnt an earth wire connected in the loom so that was the only extra work i had 2 do, so basically its all plug n play.