Trans slipage :(

[NVE_069]

Well i new this day would come sooner rather then later

Anyhow when I boot it the trans like revs but dont move untill a few sec's later an then rips an takes off. Now I like it but the fact is I know its not suppost to do that lol. Anyhow 1st thing was check OIL so yes the oil is fine.

Any other idea's what may course this an I no Ill hear It Needs A Rebuild.
on the other hand I dont quite have enough for a rebuild but can buy a 2nd hand 1 with low k's and can test it in the car b4 buying it?

What ur opinions and suggestions plz.

The 1 i speak of is out of a Wh Stato. Should suit mine shouldnt it? Well I know Vz ones do but just have to change the line pressure to suit.

4L60E auto, from WH 5.7 gen 3, VT VX VY VZ HSV

[Maci]

may i suggest getting the transmission serviced?
new filters, new gasket the whole deal.

got my local mechanic to do it for me for about $150.

just because its full doesnt mean a filter is jammed up with crap or something, and in the grand scheme of things its cheaper than replacing lol....

[Ozzie]

Or you could do what I did and buy a $10 bottle of auto trans treatment.
It reduces slippage for smoother changes and rejuvinates the seals.

Worked for me but its just a thought

[NVE_069]

Yeh my thought were to service it I have done it b4 so might do it again. so how i go b4 go getting another box lol

[Ozzie]

its an auto yeah?

why dont you just replace the converter instead of the whole box? Itd be the torque converter slipping

[nick3110]

yeh go pay the $150 for a trans service, then if that doesn't work try the $10 auto trans treatment, these are better than paying anywhere up to a couple of grand for a new one.. and even a second hand transmission would be pretty expensive..

[NVE_069]

I got a second hand 1 lined up for 500 with 167,000 compared to my 250,000 and I can test while its still in the car. She is booked in for wed for a Free check lol an ill c what they come up with. if its more then I wonna know ill grab the 500 box an out it in.

Yeh auto aswell. When u drive it like revs alittle then kicks in which my 1st thought was convertor aswell. if thats the case ill thro a small stall in instead.

[NVE_069]

I was gunna service it today as its only oil filter an gasket isnt it ? rather spend the 60 odd then 160. as i have done them on my old car anyway. dont wonna them to rip into it an then ill have to pay for more oil lol

[NVE_069]

these are better than paying anywhere up to a couple of grand for a new one.. and even a second hand transmission would be pretty expensive..

I can get a brand new spanken box for 1650 from holden ? and yeh not sure about 2nd hand ones have not seen to many around but seen this 1 for 500. so ill see how i go i guess

[chargedvx6]

Go to a trans place and get them to hook in their real time diagnostics. It will show what's being commanded to happen in the box and what is actually happening in the box. Your car runs on a computer so utilise that to diagnose it.

Sounds like foward clutches to me though. If it does need a rebuild I would go that way instead of replacing it with another stocker

[nick3110]

I can get a brand new spanken box for 1650 from holden ? and yeh not sure about 2nd hand ones have not seen to many around but seen this 1 for 500. so ill see how i go i guess

fair enough then lol.. but ay ur money :P

[walesy]

next time shift kit it... box will last longer... but then again things futher down thre drivechain will cop it :P...

[NVE_069]

Welllike I said above money is tight atm as I have just moved an settling into bills and what not. so once the shop tells me whats wrong ill go from there but if she need a rebuild Ill buy a 2nd hand box for time being then rebuild mine when its out then yeh.

$1650 is from Holden in Vic BTW just so u know im not just maken bullshit prices up. but in saying that i might even be able to borrow some money from my bro an put what I have toward a rebuild I guess. As long as its not too much lol but from what I have seen theres tones of diff prices out there.

Sum1 above said it sounds like the convertor if thats the case lol Should I throw a stall in it instead ?

Just getting idea's aswell guys.

Thanks

[chargedvx6]

Either way I would chuch at least a 3500 stallie in front of the box. It's one of those things. Also check if you have a rear main leak and be ready to replace the rear plate too since the box will be out.

[NVE_069]

OH yeh. Would be a good change to change if nedd be. On the other hand this wont be the qst time it comes out within 2 months it will be out again for a full overhaul. Engine trans all the driveline an what not. just waiting on the laywers. But need a quik fix atm

[NVE_069]

Well the box is stuffed so a rebuild is the go booked in on monday an at a good price of 1650 which like always I was expecting 2000 at least for some reason.

I could go the 2nd hand box for 500 an then throw a 3000 stallie in but who knows that could go within weeks knowing my luck. So rebuild is the go at this point, Stally will be when the engine comes out for the rebuid aswell.

[vxcalais_01]

What are they doing to it ? Chargedvx6 is the man to talk to on these things hehe

[NVE_069]

Just a rebuild mate. Stallie will be later when the engine comes out for a rebuild as the funds are tight NOW lol.

[SIG-054]

for that price it would be a bare basic rebuild, i personally would have bought a brand new box for that money. i paid 3000 for my fully built 4l60e, the only thing that wasnt changed was the input shaft.

[camstatic]

The price difference between a stock rebuilt 4L60, and the 4L60 with stage 2 shift kit, corvette servo, corvette sun gear, and boost valve I ended up with was $100... Might pay to ask about a bit of a trick up.

[NVE_069]

I hear ya all but like said money is real Tight. 1650 I just managed to scrap up also. Like said its all comen bak out when the engine gets mild work done in a month or 2. the fact is we only got 1 car so makes it hard with my little one an that.

When the box comes out again also it will be getting tricked up aswell. I no it might cost me that little more again but I can't help it at this point. Engine is prob gunna get a freshn up an what ever else I'd ned for a raptor to go on. thats my forseeable future anyways lol.

[chargedvx6]

Bad luck with needing it rebuilt mate. Always better to rebuild IMO. At least the box can get set up better than a new stocker (isn't hard) and if the builder knows the box it will perform well and be strong without alot of money wasted on showy parts that are un needed.

Roller shafts conversion is a good cheap mod. It also allows you to utilise the existing reaction carrier by sleeving the spline. Should save you $500 right there and the stocker is much lighter than the beast so it will drain less power.

[NVE_069]

Yeh the shop seems to be known up here so im happy for them to build it. unless it should be better once done

[NVE_069]

Car should be bacl today fingers crossed. Drobbed it off yesterday an they said today an it should be ready. IF I could have waited 1 more pay I would have gone the Full rebuild with stalloe and that but yeh couldnt wait so not too worrie. Just getting over driven my brothers maloo already.

[NVE_069]

All fixed and good, BUT they forgot the braket bolt that goes to the radiator an the hoes rubbed on the fan belt and is friggin leaking everywhere so now have to wait till tuesday for them to fix it but they dont know that yet not happy at all