Keza87's Manual Wagon

[Haydz]

Hooo ray for update.



ohh yeah i cracked the 2nd page.

[keza87]

lol don't you have anything better to do? like strip a car?

[Haydz]

I have to clean my garage so i can fit my car in there.

but thats happening saturday so uhhh

the vp went on the sunday. couldnt stand to look at it

and the vn is now a parts car. full to the roof of parts from several cars. eg i have 6 vn headlights.





EDIT: SO MUCH for an UPDATE. all i see is blank.





EDIT2: This is getting beyond a joke. how many times must i refresh your page....





EDIT3: Cmon Kez. Get off your ass.

[djeyecon]

ne updates yet? excited to see how this car is coming along.

[keza87]

Latest update is that I am ordering a Raptor kit. Hopefully I will have it by the end of the month.

Just had the air-con fixed. Hasn't been working since the accident. Discovered the condenser was installed backwards and blew up the compressor. Luckily the 2nd hand one from pick 'n pay less worked!

That's the update so far

[rch-13z]

Latest update is that I am ordering a Raptor kit. Hopefully I will have it by the end of the month.

Just had the air-con fixed. Hasn't been working since the accident. Discovered the condenser was installed backwards and blew up the compressor. Luckily the 2nd hand one from pick 'n pay less worked!

That's the update so far

Wouldnt the panel beater have to pick up the cost of their error when re-installing the aircon? mmm boooost

[keza87]

I haven't brought it to his attention yet. Still need to get the paint fixed up which will mean a full respray of the front again

[djeyecon]

Latest update is that I am ordering a Raptor kit. Hopefully I will have it by the end of the month.

Just had the air-con fixed. Hasn't been working since the accident. Discovered the condenser was installed backwards and blew up the compressor. Luckily the 2nd hand one from pick 'n pay less worked!

That's the update so far

raptor kit fitted before october cruise i hope?

[keza87]

lol I hope so as well! I should get it late next week

[djeyecon]

lol I hope so as well! I should get it late next week

intercooled? fully hektik BoV? how much u end up paying for it?

[mischa]

Raptor kez!!! wtf u didnt tell me yet!!!
Going by what his said before, proberly be no intercooler tell later stage and no BOV.

Whole front respray? what the?

[keza87]

Yeh the front needs to be resprayed at the panel beater's cost as it wasn't done properly and has massive stone chips. The panel beater also installed the condensor the wrong way and blew up my compressor!

Just the standard stage 1 at the moment. No BOV and not intercooled

[djeyecon]

Yeh the front needs to be resprayed at the panel beater's cost as it wasn't done properly and has massive stone chips. The panel beater also installed the condensor the wrong way and blew up my compressor!

Just the standard stage 1 at the moment. No BOV and not intercooled

what a d!ckhead! lol. intercooler kit on the horizon i suppose?

oh btw keza i bought the shifter. should be gettin to me on tuesday. =]

[keza87]

Yeh I am not happy with them considering that I had another car fixed there and had nothing go wrong with it.

Trust me, you will like the short shifter! It only takes 5 minutes, 2 nuts and a little bit of cutting.

[djeyecon]

Yeh I am not happy with them considering that I had another car fixed there and had nothing go wrong with it.

Trust me, you will like the short shifter! It only takes 5 minutes, 2 nuts and a little bit of cutting.

not good... get a new smash shop. where did you get the work done?

yeah the guy @ Billet really knew how to sell it over the phone. couldn't refuse. does everything necassary come with it? he told me theres even pictures of where to cut the original boot etc

[keza87]

All they send is the shifter and instruction.

Unbolt the old shifter, cut the shifter boot and install the shifter and boot then its done

After the paint gets re-done I am not going back. I would rather not state who the panel beater is because along the relative links he is a family friend. This was not discovered untill the job was started and was recomended by another family member that did not know the links as well. All complicated

[djeyecon]

All they send is the shifter and instruction.

Unbolt the old shifter, cut the shifter boot and install the shifter and boot then its done

After the paint gets re-done I am not going back. I would rather not state who the panel beater is because along the relative links he is a family friend. This was not discovered untill the job was started and was recomended by another family member that did not know the links as well. All complicated

sweet can't wait. so i just use the original nuts? do i have to buy anything else?

ah k thats fine. what area are you in? i know of a lot of panel shops i'd be glad to recommend.

[keza87]

Just use the original nuts, no need to buy anything else.

I live in the Bankstown/Ingleburn area. I go through Edgar St every day for work so I know there are a lot of panel shops there. I can't afford to spend any more on the paint.

[radarak47]

I have the Raptor S/C stage one on my VX. No BOV but you get a plumbback Bosch CBV with the kit.

[djeyecon]

Just use the original nuts, no need to buy anything else.

I live in the Bankstown/Ingleburn area. I go through Edgar St every day for work so I know there are a lot of panel shops there. I can't afford to spend any more on the paint.

what paint do you need? i have my connections at TAFE. if you wanna pm us ur colour code i can get you a litre n a half or so.

since when are ingleburn and bankstown close? rofl. i know a few good smash shops around campbelltown, padstow, wetherill park.

[keza87]

Thanks for that Rad. It will be interesting to install. Me and my friends are going to setup the web-cam and film the install V8 supercar style. How long have you had the kit installed for?

lol I am in both areas. It should be right I will get it sorted. I will let you know if I have any more issues.

[djeyecon]

lol I am in both areas. It should be right I will get it sorted. I will let you know if I have any more issues.

sure mate. good luck with it all!

[djeyecon]

is keza blown yet?

btw dude my new billet shifter is ****ing amazing.

[keza87]

lol I received the kit on Friday. Mum is taking the computer to get reprogrammed as she is in QLD (Saves postage costs) and I will be installing it on Sat.

Shifter is a BIG improvement isn't it?

[djeyecon]

lol I received the kit on Friday. Mum is taking the computer to get reprogrammed as she is in QLD (Saves postage costs) and I will be installing it on Sat.

Shifter is a BIG improvement isn't it?

huge improvement. and alot of fun aswell.