Results 1 to 14 of 14

Thread: squeeky brakes

  1. #1
    Ride
    vy Senator Signature, vx Berlina s2

    Join Date
    May 2006
    Location
    Blue Mounts, Sydney
    Posts
    8

    Default squeeky brakes

    I just replaced the front rotors and pads on my vy senator signature with 4 piston calipers and drilled rotors and it seems to squeek alot every now and then, just wondering if this is normal for big brakes?? any suggestions

  2. #2
    Ride
    VY SII HBD Calais L67

    Join Date
    Dec 2006
    Posts
    1,414

  3. #3
    Zuicider is offline Banned
    Ride
    Set of thongs
    Caribbean Stud Poker Champion!
    Join Date
    Dec 2005
    Location
    Stonedville
    Posts
    1,740

    Default

    doesnt sound like you have bedded them in, anti squeel isnt need if you bed them in correctly

  4. #4
    Ride
    VY S Sedan

    Join Date
    Sep 2007
    Posts
    203

    Default

    Quote Originally Posted by Zuicider View Post
    doesnt sound like you have bedded them in, anti squeel isnt need if you bed them in correctly
    How did you come up with this incorrect assumption??
    Brake squeal is mostly caused by the brake pad vibrating within the caliper at a high frequency.
    Anti-squeal glues the pads to the pistons and the caliper in some cases,so it doesn't vibrate.
    Bedding in brakes correctly will not stop the pads from vibrating at all without anti-squeal adhesive applied .

    Even with anti-squeal adhesive applied,we have still had problems from 4 piston calipers on Commodores.
    "Green Stuff" brake pads seem to be a great way to prevent squeal on these brakes.

  5. #5
    Ride
    VZ AWD One Tonner

    Join Date
    Jul 2006
    Location
    Brisbane
    Posts
    1,785

    Default

    Quote Originally Posted by whitey66 View Post
    "Green Stuff" brake pads seem to be a great way to prevent squeal on these brakes.
    Most EBC's (and also TRW) come with a stuck on rubber shim on the pad as standard, and they're far and away the best way to suppress noise. If you're not into TRW or EBC's (generally the price versus performance ratio rules out EBC for most people) then you can actually buy the EBC stick on shim kits to apply to your own pads. We sell them for $16.50, and that will do an axle set of pads.
    - GSL RallySport - Ph: 1300 884 836 -
    Sick of paying too much for high performance brake pads? Want high performance and cold bite with low rotor wear?
    - QFM Performance Brake Pads -
    Also specialising in
    - DMS High Performance Shock Absorbers - Monit Rally Computers -

  6. #6
    Ride
    VY monaro

    Join Date
    Nov 2008
    Location
    Wheelers Hill
    Posts
    136

  7. #7
    minux's Avatar
    minux is offline Infidel Bear
    Ride
    300rwkw FG G6ET/2011 Sti Spec R Hatch
    Mini Putt 2 Champion!
    Join Date
    Feb 2005
    Location
    Melbourne
    Posts
    6,880

    Default

    Quote Originally Posted by hotcommodore View Post
    I just replaced the front rotors and pads on my vy senator signature with 4 piston calipers and drilled rotors and it seems to squeek alot every now and then, just wondering if this is normal for big brakes?? any suggestions
    Im just curious as to why you replaced 4 piston calipers with 4 piston calipers?

    Anyways, as for the squealing, in some pads you will find this will die down, i trialled a set of ferodo's(rubbish pads) they squealed like a pig, even after bedding in, after 500 or so km's they come good.. Even bedding them in correctly they will squeal. That said, i have NEVER used any anti squeal on any of my cars. this also said, i have only ever used EBC Greenstuff or redstuff, so this could be why.
    "Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind."
    - Theodor Seuss Geisel



  8. #8
    lastlegend's Avatar
    lastlegend is offline Phantom VY SS
    Ride
    2003 Black VY SS + 1999 Silver VT Olympic Sedan

    Join Date
    Sep 2008
    Location
    Thorneside QLD
    Posts
    183

    Default

    Quote Originally Posted by hotcommodore View Post
    I just replaced the front rotors and pads on my vy senator signature with 4 piston calipers and drilled rotors and it seems to squeek alot every now and then, just wondering if this is normal for big brakes?? any suggestions
    I did the same thing recently and replaced the Rotors with Bigger & Wider Curved Slotted style and I had to change out the Calipers to match the wider rotors.

    I have a very annoying squeek that seams to come & go once the brakes have hit operating temp....any Ideas?

  9. #9
    Ride
    vy Senator Signature, vx Berlina s2

    Join Date
    May 2006
    Location
    Blue Mounts, Sydney
    Posts
    8

    Default

    i didnt change the calipers, just the rotors and pads. I first tryed ferodo pads and they sqeeked like crazy, i pissed them off and got bendix ultimate pads with the plastic coating on the rear of the pads. They are not as bad as the ferodos but still enough to piss me off

  10. #10
    minux's Avatar
    minux is offline Infidel Bear
    Ride
    300rwkw FG G6ET/2011 Sti Spec R Hatch
    Mini Putt 2 Champion!
    Join Date
    Feb 2005
    Location
    Melbourne
    Posts
    6,880

    Default

    Quote Originally Posted by hotcommodore View Post
    i didnt change the calipers, just the rotors and pads. I first tryed ferodo pads and they sqeeked like crazy, i pissed them off and got bendix ultimate pads with the plastic coating on the rear of the pads. They are not as bad as the ferodos but still enough to piss me off
    Go EBC Greenstuff, you will be very happy with them. I run them on my Sig without an issue.
    "Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind."
    - Theodor Seuss Geisel



  11. #11
    Ride
    vy Senator Signature, vx Berlina s2

    Join Date
    May 2006
    Location
    Blue Mounts, Sydney
    Posts
    8

  12. #12
    minux's Avatar
    minux is offline Infidel Bear
    Ride
    300rwkw FG G6ET/2011 Sti Spec R Hatch
    Mini Putt 2 Champion!
    Join Date
    Feb 2005
    Location
    Melbourne
    Posts
    6,880

    Default

    Quote Originally Posted by hotcommodore View Post
    Where do you buy them? im in sydney
    Contact a few brake places, any decent brake mob will stock them.
    "Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind."
    - Theodor Seuss Geisel



  13. #13
    Ride
    vy Senator Signature, vx Berlina s2

    Join Date
    May 2006
    Location
    Blue Mounts, Sydney
    Posts
    8

    Default

    I looked at these greenstuff pads on the net and they recomend to only use them on cars up to 750kg > eg kit cars. Should i be looking to get the red stuff pads? has anyone used these before?

  14. #14
    minux's Avatar
    minux is offline Infidel Bear
    Ride
    300rwkw FG G6ET/2011 Sti Spec R Hatch
    Mini Putt 2 Champion!
    Join Date
    Feb 2005
    Location
    Melbourne
    Posts
    6,880

    Default

    lol, dude, every person i know runs greenstuff, they are perfect for street only applications. Not sure where you read they are only suitable for cars up to 750kg.
    "Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind."
    - Theodor Seuss Geisel



Similar Threads

  1. Wobbly/squeeky, driver side rear wheel.. any ideas?
    By shmickmik in forum VN - VP Holden Commodore (1988 - 1993)
    Replies: 7
    Last Post: 25-05-2009, 07:03 PM
  2. Squeeky wheels.
    By voney in forum VN - VP Holden Commodore (1988 - 1993)
    Replies: 2
    Last Post: 30-11-2008, 04:05 PM
  3. squeeky tiller
    By dagar187 in forum VZ Holden Commodore (2004 - 2006)
    Replies: 3
    Last Post: 18-01-2007, 05:54 PM
  4. Squeeky brakes driving me insane.
    By MJR_VR in forum VR - VS Holden Commodore (1993 - 1997)
    Replies: 8
    Last Post: 29-11-2006, 02:18 PM
  5. Squeeky brakes
    By VL-187 in forum VT - VX Holden Commodore (1997 - 2002)
    Replies: 6
    Last Post: 14-06-2005, 08:29 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72