Digial speedo
Hi all,
Does anyone know exactly how to do the digital speedo with tech 2? I have the tech 2 scan tool and what not, but would like to know how its done? Feel free to pm or post replies on here. Please dont say "ask phreddy" as i have pm'd him already.
Thanks in advance
There's a setting called police mode
Not exactly sure where its located as holden took 5 mins to find it and I lost track.
Check out My SV8 One Tonner
You can get a lot farther with a kind word and a gun than a kind word alone
You go into instruments,then programming,then configuration.
In configuration,"Police mode" will be set to "No",change it to "Yes" and confirm program.
Is there a program or anything that needs to be downloaded off the gm website at all? Some people here at work seem to think each car needs its own download or something like that
Why ask the question if you don't listen??
My response told you exactly how to do it.
You only need to get onto the GM website to SPS (Service Programming System) program a module,you don't need to do this though.Just follow my instructions and you'll be sweet
Ok unfortunately another question. After initial connection and initial scan it picks everything up showing engine codes and crap like that, but it gets to a point where there isno communication. Is there something that isnt being done correctly?
Do you just have a scan tool that picks up codes only or do you have the unit that holden have that can manipulate the data
Check out My SV8 One Tonner
You can get a lot farther with a kind word and a gun than a kind word alone
Yeah,is it a genuine Tech2 or just a generic scan tool?
It sounds to me by what you've said,that you are not using a Tech 2.
Take a pic of the scan tool and post it up here.
I am pretty sure it says tech 2 on the unit but will get a pic up first thing in the morning
Yes whitey is does. So would there be any reason as to why it wouldnt be communicating? I will take my vy into work tomorrow and connect it up again, and i will go to exactly the options you have stated so as to not get it wrong.
Finally its all done. Everything was connected the same but this time it decided to work
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote