Results 1 to 4 of 4

Thread: Need some info...

  1. #1
    gordo881005's Avatar
    gordo881005 is offline unholy confessions
    Ride
    VY V6 Storm2

    Join Date
    Mar 2010
    Location
    Hunter Valley
    Posts
    57

    Question Need some info...

    I put the ute over me pops pit the other day, to find out if i could see what was making the fronts tires shudder back and forth, and i got a couple of images i wanted to swing by you guys, to see if you could tell me for one..."What is it?"....and 2...."Is it a problem?"...Let us know...
    Cheers.
    Attached Thumbnails Attached Thumbnails Need some info...-ute1.jpg   Need some info...-front-bush.jpg  
    I’m held accountable
    For every idle word
    Curse the idle words

  2. #2
    Calaber's Avatar
    Calaber is offline Nil Bastardo Carborundum
    Ride
    CG Captiva SX

    Join Date
    Nov 2007
    Location
    Lower Hunter Region NSW
    Posts
    2,435

    Default

    The first picture is the lower sway bar link ball joint. The rubber seal is stuffed so the ball joint is possibly knackered too. The link should be replaced unless you find the joint is still tight and you can replace the seal. That would NOT make your front tyres shudder - a stuffed sway bar link joint will just rattle annoyingly.

    The second picture is the stabiliser link front damper bush. It's filled with hydraulic oil and will leak if it's stuiffed. There is no sign of leakage from that bush and it appears to be ok.

    There are numerous things which can cause the front wheels to "shudder" Some of them are badly balanced tyres, worn steering rack or tie-rod ends and clapped out shocks but the one which comes to mind most easily is warped discs, a common fault with VT-VZ Commodores. Warped discs are very easy to diagnose.

    Does the steering wheel vibrate when you are driving or only when you apply the brakes? If it only occurs when braking, the discs are the most likely culprits. If it brakes without any shuddering, check the other suspension and steering items I have mentioned above.

  3. #3
    gordo881005's Avatar
    gordo881005 is offline unholy confessions
    Ride
    VY V6 Storm2

    Join Date
    Mar 2010
    Location
    Hunter Valley
    Posts
    57

    Default

    So do we have part numbers i should be chasing up? i want to get this sorted so i can go back to normal
    I’m held accountable
    For every idle word
    Curse the idle words

  4. #4
    db_notso's Avatar
    db_notso is offline diagnostic technician...
    Ride
    vt v6, mods(susp brakesetc...)

    Join Date
    Oct 2010
    Location
    sunshine coast, qld
    Posts
    979

    Default

    get tyre balanced and checked over closely by eye for flat spots from being unbalanced too long

    check wheel bearings
    you know jack it up and spin tyre should be smooth

    good way to check tyres for unbalance without machine is too swap tyres front to back and see if it makes a difference~!

Similar Threads

  1. Excellent Info on REbuild for L36 or L67 Great info...
    By vxcalais_01 in forum V6 Development And Modification
    Replies: 6
    Last Post: 22-05-2010, 12:26 PM
  2. soon to be first v8 need info & help
    By Archers in forum VZ Holden Commodore (2004 - 2006)
    Replies: 7
    Last Post: 02-01-2010, 07:00 PM
  3. Any info on these
    By Fun_Bucket in forum Car Audio
    Replies: 12
    Last Post: 21-04-2009, 01:47 PM
  4. need info on VR/VS ute
    By wooley in forum VR - VS Holden Commodore (1993 - 1997)
    Replies: 3
    Last Post: 03-12-2005, 07:09 PM
  5. hdt info
    By ORANGEGT in forum General
    Replies: 2
    Last Post: 23-11-2005, 09:49 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72