Results 1 to 15 of 15

Thread: putting regular cy cup holders into a vy berlina

  1. #1
    Ride
    Vy II

    Join Date
    Jun 2010
    Posts
    32

    Default putting regular cy cup holders into a vy berlina

    i was wondering if i could be able to remove the hatch like compartment where the drink holders would be in any other vy apart from calais, and instead put in the rubber cup holder insert instead, because honestly berlina/calias cup holders really dont hold drinks all too well

  2. #2
    Calaber's Avatar
    Calaber is offline Nil Bastardo Carborundum
    Ride
    CG Captiva SX

    Join Date
    Nov 2007
    Location
    Lower Hunter Region NSW
    Posts
    2,435

    Default

    The top piece of the console is the same for all Execs, Berlinas and Calais, except for the colour schemes. The lidded compartment can be removed by taking off the top of the console and unscrewing the compartment from underneath. You will then find that the side of the recess in the console lid has been cut away to fit the lidded compartment. The rubber drink compartment divider can then be dropped in but with the whole left had side of the compartment cut away, I don't think it will stay in place and hold drinks securely. You might be better off getting the console lid from an Exec and just swapping the whole thing over.

  3. #3
    Ride
    VY Executive S2

    Join Date
    Jan 2010
    Location
    Melbourne
    Posts
    216

    Default

    Quote Originally Posted by Calaber View Post
    You might be better off getting the console lid from an Exec and just swapping the whole thing over.
    yeah do this, it's really simple

  4. #4
    Ride
    Vy II

    Join Date
    Jun 2010
    Posts
    32

  5. #5
    ashbox's Avatar
    ashbox is offline 6 speed
    Ride
    VZ SS 6 Spd

    Join Date
    Apr 2007
    Location
    The Car
    Posts
    1,083

    Default

    holdens or motor traders......its basically just a rubber insert
    Chev badges are an instant fail

  6. #6
    Ride
    Factory Blown VY S2 Calais

    Join Date
    Jun 2005
    Location
    Brisbane Bayside
    Posts
    508

    Default

    I have just done this in my vy calais. Best "downgrade" ever. As much as I like the calais cupholders, they phail real world use on a couple of levels.

    Anyways, rubber insert $10 from wreckers (I have seen them on ebay). Lift console just enough to unscrew the flip top compartment from underneath.

    As calaber says, the lhs of the console is cut away, but the rubber cup holder insert fits snugly, and cups/bottles are just as secure as in a standard console.
    The cutaway is not the whole of the lhs - just the top half. There is an aesthtic issue with the hole, and the chance that coins etc could be lost, but I don't feel it's worthwhile replacing the console top. I will be looking at filling the void somehow.
    Attached Thumbnails Attached Thumbnails putting regular cy cup holders into a vy berlina-cupholder1.jpg   putting regular cy cup holders into a vy berlina-cupholder2.jpg   putting regular cy cup holders into a vy berlina-cupholder3.jpg  
    "You want fast, reliable and cheap ? You'll find a Commodore out there that can provide any two out of those three!"

  7. #7
    Ride
    vy executive s2

    Join Date
    Jul 2008
    Posts
    247

  8. #8
    Ride
    Vy II

    Join Date
    Jun 2010
    Posts
    32

    Default hey

    thats exactly what i want to do with my berlina im over drinks spilling everywhere when going round a corner and at the slowest of speeds, can you link me to some on ebay i cant seem to find them, i went to the local wreckers and they said they dont sell them

  9. #9
    Ride
    VY Executive S2

    Join Date
    Jan 2010
    Location
    Melbourne
    Posts
    216

    Default

    wow really? the wreckers dont have them? my local wrecker would have at least 20 of them lying around :/

  10. #10
    Ride
    Factory Blown VY S2 Calais

    Join Date
    Jun 2005
    Location
    Brisbane Bayside
    Posts
    508

    Default

    A simple case of finding a wrecker with VY/VZ carcasses you can pick over - as opposed to the sort where they shelve up for display only the choicest of bits.
    "You want fast, reliable and cheap ? You'll find a Commodore out there that can provide any two out of those three!"

  11. #11
    Ride
    Vy II

    Join Date
    Jun 2010
    Posts
    32

    Default ahhh

    rang the wreckers and they dont have any, can anybody link me to an ebay page that sells them, im really keen

  12. #12
    Ride
    Factory Blown VY S2 Calais

    Join Date
    Jun 2005
    Location
    Brisbane Bayside
    Posts
    508

    Default

    Nothing on ebay at the moment. Try holden for new? You may be surprised - whether cheap or expensive you will be surprised, sometimes it's like they pick a number out of the air
    "You want fast, reliable and cheap ? You'll find a Commodore out there that can provide any two out of those three!"

  13. #13
    TMM's Avatar
    TMM
    TMM is offline OEM+
    Ride
    VY Berlina S2

    Join Date
    Jun 2008
    Location
    VIC
    Posts
    835

    Default

    These guys have the console lids brand new for around $60 iirc:
    eBay My World - motorfielddirect
    if its not listed, just ask them.
    their website is http://www.nvu.com.au but the site is down at the moment.

  14. #14
    esca_ByDesign's Avatar
    esca_ByDesign is offline Clean and Classy
    Ride
    VY exec By Design

    Join Date
    Jun 2009
    Location
    Croydon Hills
    Posts
    222

    Default

    Bundoora Auto wreckers have about 5-10 vy/vz's going all the time, would have heaps there for a couple of dollars.

    on the other side of the story, the console with lid that everyone is trying to get rid of, i am after one, but i got told it would just slip straight into my exec hole, but from the look of you guys cars there is a massive chunk out of the side, is this needed for the hinge or something?

    cheers
    Quote Originally Posted by WogBoyz View Post
    So if i dont wax my car, ill never get dust on it? gotta try this one!
    Looking to buy VE super sport replica's


  15. #15
    Ride
    vy executive s2

    Join Date
    Jul 2008
    Posts
    247

    Default

    Quote Originally Posted by esca_ByDesign View Post
    Bundoora Auto wreckers have about 5-10 vy/vz's going all the time, would have heaps there for a couple of dollars.

    on the other side of the story, the console with lid that everyone is trying to get rid of, i am after one, but i got told it would just slip straight into my exec hole, but from the look of you guys cars there is a massive chunk out of the side, is this needed for the hinge or something?

    cheers
    Bingo! You've got it
    CAM'S VY PHREDDIFIED AND LEATHERED!
    http://forums.justcommodores.com.au/...w-leather.html

Similar Threads

  1. Putting Calais/Statesman/Caprice steering wheel buttons onto Exec/Berlina?
    By Z2TT in forum VR - VS Holden Commodore (1993 - 1997)
    Replies: 5
    Last Post: 02-09-2010, 03:20 AM
  2. Putting Rear Parcel Shelf Speakers In Berlina
    By mickey in forum VT - VX Holden Commodore (1997 - 2002)
    Replies: 25
    Last Post: 07-06-2009, 10:06 AM
  3. Premium or regular unleaded?
    By chrisdoesitbetter in forum VR - VS Holden Commodore (1993 - 1997)
    Replies: 19
    Last Post: 15-05-2009, 07:36 PM
  4. regular lpg or gas injection on vt
    By bezz in forum VT - VX Holden Commodore (1997 - 2002)
    Replies: 5
    Last Post: 03-10-2007, 06:59 AM
  5. ugly drink holders in a vt berlina
    By justbad4you in forum VT - VX Holden Commodore (1997 - 2002)
    Replies: 13
    Last Post: 02-10-2005, 12:12 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72