gday all
I have just bought a vy berlin with the 5.7 gen 3
the last few days ill just be driving along and the horn just starts going off why would it do this i cant find anything in the manual
any help would be loved thanks
aussie
When it goes off can you stop it by manipulating the horn pad on the steering wheel?
Does the horn work normally apart from your issue?
Silver Certified.
yer mate i give it a tap and it stopes sometimes it startes to go again sometimes it doesn't
sounds like the harness under the airbag is shorting out,
take it to a workshop and get airbag taken off and the horn "plate" and "harness" checked good luck~!
^^^ What he said
Silver Certified.
yes had this on a VY where I worked - they changed the airbag horn pad and it stoped. It went off most of the time in the afternoon when the sun heated up the car - it never happened while parked in the shed.
White 05 V6 VZ Executive - Thrashed Ex Telstra car
and 3 Dangerous non ABS VN's
is it much of a job and where is the horn ill have to disconect it till i can get it in monday
look up under your bumper right side? youll see it or you can pull the fuse in the fuse box
If I recall correctly, there was an issue with a metalised barcode strip fixed to the back of the airbag which could become partially detached in warm weather and cause a short, activating the horns. The cure was to remove the airbag and pull the tag off completely, then refit the airbag. I'm sure there are threads on here somewhere about this problem. It's certainly worth looking at this as a first option before paying for a new airbag or wiring.
PROBLEM DESCRIPTION
Some customers may complain that their vehicle’s
horn intermittently sounds on its own.
Investigation of these cases reveals that a metallic
backed barcode label fixed to the steering wheel
directly below the horn bar contact (which is located
on the underside of the airbag) may curl up and earth
the horn bar contact which causes the horn to sound.
This condition may be more common with increased
cabin temperatures.
PRODUCTION RECTIFICATION
Steering wheels with relocated barcode labels were
fitted to vehicles from:
ISOVIN: Build Date:
6G1YK43A23L968463 29/1/03
SERVICE RECTIFICATION
1. Remove the air bag as per the procedure in PV
SIP VY / Electrical System / Section 12M
Occupant Protection System / 2. Service
Operations / 2.3 Steering Wheel Inflatable
Restraint Module Assembly.
2. Inspect the steering wheel hub for a label as
shown in Figure 1.
3. Remove the label highlighted in Figure 1.
4. Reinstall the air bag as per the SIP procedure.
Silver Certified.
Stop perving on chicks dude lol
Yours Kindly,
Jim
It amuses me that you would even begin to consider that your intelligence is higher than mine.
Those that arent intellectually challenged like yourself would realise that I simply cut and pasted an official Holden techline to reinforce what you posted.
But hey dont let me stop you from trying to boost your own ego as youre clearly feeling a little insecure if you need to use the lowest form of wit also known as sarcasm.
Silver Certified.
Mate, I think you have totally misinterpreted my post. If it offended you or annoyed you, it wasn't meant to. And it was meant to be humorous, not clever or sarcastic. There are quite enough sarcastic people on this forum - I don't need to join them.
And I'm way too old to bother trying to boost my ego.
Well, I'm glad you two sorted out your little "issue"!!! LOL I was just glad to see that the problem was rectified from 29/1/03. So mine being a 10/03 model shouldn't have this problem.
'Ah well, I suppose it had to come to this.'
thanks all it was that sticker
the auto elec wouldnt of found it i didnt tell him he said
he is now a member of this site
Thanks for the feedback mate. Nice to know that Ricey and I were on the right track for you.
Good info guys. I had the same problem and fixed it with info from here. Took 15 mins and cost nothing. If I had taken it to my dealer I'm sure they would have charged heaps.