VY Indicator

[schoey3]

hey guys,

my Front right indicator, is stuffing up i have changed the globe and its still not working, the indicator is blinking fast which, means wiring fault or blown globe.

Any Suggestions of what i can do.

Thanks from,
Schoey3

[Jezza]

is the globe the correct watts and volts as the old one because if its less then that could cause it to flash fast

[Blazed1101]

Check your ground that generally is the problem, also if that doesn't work try putting an led globe with a resistor on it. they would be the first things I look at

[schoey3]

nah i put a brand new globe in that was the exact same as the one that was in there.

it will be a wiring fault does anyone know how i am able to fix that or where the front right indicator wires go so i can test them?

[colgf]

do you have a towbar plug?? sometimes a loose wire in that causes the blinkers to go haywire, or a blown globe on the side that is flashing fast....

[schoey3]

nope no towbar plugs do you think it could be the wiring loom?

[D3CID3R]

whack a multi meter on it.. if in the end its stuffed.. parallel of the headlight indicator circuit

[schoey3]

aiight.. you reakon i can pick one from the wreckers?

[schoey3]

bump......

[Sean880]

nah i put a brand new globe in that was the exact same as the one that was in there.

it will be a wiring fault does anyone know how i am able to fix that or where the front right indicator wires go so i can test them?

What was the wattage of the new globe you installed?

[Killr6]

you can pick them up from supercheap.

have you installed it all correctly? i had one i did not install properly and when i double checked and fixed it, it worked fine.

[H Bomb]

also check the rear and side indicator and make sure they are fully functional, the whole side will flash faster if one of the bulbs is gone on the whole side