Results 1 to 10 of 10

Thread: shock absorbers

  1. #1
    binghy is offline Matty 038
    Ride
    Vy Equipe Series 2

    Join Date
    May 2009
    Location
    adelaide
    Posts
    54

    Default shock absorbers

    I am going to change my shocks and I just wondered if anyone has used Gabriel shocks

    I have a by sedan with fe2 I tow a trailer nothing huge

    Any help would be appreciated

  2. #2
    som
    som is offline
    Ride
    vt executive

    Join Date
    Apr 2011
    Location
    thorneside qld
    Posts
    180

    Default

    If you're only replacing the rear shocks they're probably ok ,they're certainly cheap and are going to be heaps better than worn out shocks,but if you're replacing front struts as well I,d probably look at Munroe GT Sports or even GT Gas.I only have standard height suspension and I've had Gabriel shocks at the rear and GT gas up front for over 40,000km and I'm happy enough.I frequently tow a 4.6m tinny.To quote my mechanic when he saw that I'd installed Gabriels,"They've been around for a long time and are reliable enough but may be at the lower end of the scale as far as development goes."

  3. #3
    Ride
    VY SS

    Join Date
    May 2011
    Location
    Auckland
    Posts
    837

    Default

    Gas struts are far better than oil ones. Havnt looked close enough at my vy with fe2, but my vs had oil munroes from factory.

    What about kyb's?

    Surely the shocks aren't priced that differently? The cost of labour or your time would outweigh the difference? Particuarly if they flog out 40k later

  4. #4
    Ride
    VY V6 Wagon

    Join Date
    May 2009
    Location
    Tauranga NZ
    Posts
    40

    Default

    I've put KYBs in the rear of my standard wagon - definately firmed up the back. Quite hard around town, feel alot of bumps.Really good on open road.

  5. #5
    Ride
    vy one tonner v8

    Join Date
    Apr 2011
    Location
    gold coast
    Posts
    12

    Default

    wats some good shocks to go in a vy one tonner, dont carry to much weight and rarely tow trailers.

  6. #6
    Ride
    VZ AWD One Tonner

    Join Date
    Jul 2006
    Location
    Brisbane
    Posts
    1,785

    Default

    Quote Originally Posted by gazatron View Post
    wats some good shocks to go in a vy one tonner, dont carry to much weight and rarely tow trailers.
    Hi mate,

    KYB to suit are are $145 each for the front, and $99 each for the rear. Alternatively, we do also have a VERY good rear upgrade option available (which will help some of the bounciness if your ute spends most of it's time unloaded...), which is a brand called Oztec, and they're $119 per shock.

    Shipping to Goldy $8.

    Any other questions just let me know!

    Regards,
    Greg
    Last edited by gslrallysport; 02-11-2011 at 03:53 PM.
    - GSL RallySport - Ph: 1300 884 836 -
    Sick of paying too much for high performance brake pads? Want high performance and cold bite with low rotor wear?
    - QFM Performance Brake Pads -
    Also specialising in
    - DMS High Performance Shock Absorbers - Monit Rally Computers -

  7. #7
    Ride
    VZ AWD One Tonner

    Join Date
    Jul 2006
    Location
    Brisbane
    Posts
    1,785

    Default

    Quote Originally Posted by binghy View Post
    I am going to change my shocks and I just wondered if anyone has used Gabriel shocks

    I have a by sedan with fe2 I tow a trailer nothing huge

    Any help would be appreciated
    Gabriel are just a very basic cheap trade servicing shocks, nothing overly special, but still well made.

    We generally recommend KYB, which are $145 each for the front, and $69 each for the rear, or $675 for a full kit when matched with springs:
    KYB / Kings Commodore Lowering Packages!

    Regards,
    Greg
    - GSL RallySport - Ph: 1300 884 836 -
    Sick of paying too much for high performance brake pads? Want high performance and cold bite with low rotor wear?
    - QFM Performance Brake Pads -
    Also specialising in
    - DMS High Performance Shock Absorbers - Monit Rally Computers -

  8. #8
    Ride
    vy one tonner v8

    Join Date
    Apr 2011
    Location
    gold coast
    Posts
    12

    Default

    Hey so I would be best to get kyb at front, and oz tec at back do u do lowering blocks I want the back dropped 2" or wat sort of money is it to get leafs resprung, I want to do it cheap as possible any help would be great, thanks

  9. #9
    Ride
    VZ AWD One Tonner

    Join Date
    Jul 2006
    Location
    Brisbane
    Posts
    1,785

    Default

    Hi mate,

    Apologies for the late reply! A 2" lowering block it is $135. Definitely best option on rear shocks to suit one Toner is Oztec!

    Regards,
    Greg
    - GSL RallySport - Ph: 1300 884 836 -
    Sick of paying too much for high performance brake pads? Want high performance and cold bite with low rotor wear?
    - QFM Performance Brake Pads -
    Also specialising in
    - DMS High Performance Shock Absorbers - Monit Rally Computers -

  10. #10
    Ride
    vy one tonner v8

    Join Date
    Apr 2011
    Location
    gold coast
    Posts
    12

    Default

    thanks for the price, but i picked up fomr blocks yesterday, but i may buy some of those rear shocks one day i'l let u know. thanks for ur help. i'll keep in touch for sure.


Similar Threads

  1. Shock Absorbers?
    By 02storm in forum General
    Replies: 6
    Last Post: 21-10-2011, 12:00 AM
  2. sv6 shock absorbers
    By ypod in forum VE Holden Commodore (2006 - ?)
    Replies: 2
    Last Post: 11-11-2010, 07:58 PM
  3. Shock absorbers how to
    By hoju82 in forum VZ Holden Commodore (2004 - 2006)
    Replies: 2
    Last Post: 06-03-2008, 07:28 PM
  4. shock absorbers which ones ?????
    By muzza in forum VR - VS Holden Commodore (1993 - 1997)
    Replies: 3
    Last Post: 03-03-2008, 10:48 AM
  5. Shock Absorbers
    By wes_v8 in forum VN - VP Holden Commodore (1988 - 1993)
    Replies: 7
    Last Post: 07-08-2006, 10:09 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72