Vy how to fix? and where to get? help me! question and picture heavy!!

[ALL-STOCK-VY]

hey guys got a varitey of question here so.. its gona be a fairly bit post lol with pictures to help you guys understand..

Question 1:



ok so.. when i first test drove the car there was no noise in the engine bay what so ever.. after purchasing the car driving home i was stopped at the traffic lights and there was a rattling comming from the far left of the engine bay.. and i have located it to this... there seems to be 2 clips that secure this thin metal bar ( no idea wtf its used for.. aircon i think would be interested if any1 knows what it is) so anyway theres 2 clips but it seems there should be another 3.. hence the rattling noise because its not secured.. so to the questions are... wtf is it and where can i get the clips from.

Question 2:



The leather on the selector has come out of place.. ive pulled the center console out and cant figure out what was holding it in.. do i have to buy a new selector or can someone explain to me how its fixed.

Question 3:



ok... so i had my windows down and this happend.. how do i fix it lol im thinking glue.. but if for some weird reason i need to take the carpet of the roof off.. id be in trouble.

Question 4:

kinda stupid but... im missing 2 of the screws that hold the tail lights in they look like this.



where can i get them..? just holdens or what..

and on a side note.. im sorry about the big #### off photos.. ive tried resizing them several times but for some reason.. the link for photobucket is still using the orignal image.. dunno wtf is wrong with it.. and im too tired to figure the shit out..

Cheers for the help guys

[Boothy]

Q1 not sure what it is, but id just get the clips from a wrecker (must cheaper than holden)
Q2 since its only fairly thin fascia, im guessing it is glued on the underside
Q3 I believe that round grommet pops out and you can place a screw through the hoel and place the grommet back in. Same happenned to mine and that all it looks like that needs to happen
Q4 As per question 1 Id get them from a wrecker
Hope i have being of some help at least (i try to be anyway)

[Boothy]

Excuse my poor spelling especially hoel (hole)

[ALL-STOCK-VY]

cheers mate, i figured half the stuff i could get from wreckers but just wanted to get other people opinions lol and dw about spelling.. mine is also horrid at sometimes..

[paynetrainvy]

2.

The boot is held in place by little pins on the underside of the fascia there should be little wholes around the edge of the boot. Unfortunately you have to remove the console fascia to get to it.

3.

Should be held in place by a screw from memory then covered by that cap you can see.

4.

Holden or a wrecker shouldn't cost a lot a few dollars if that

[danieLOL]

2.
The boot is held in place by little pins on the underside of the fascia there should be little wholes around the edge of the boot. Unfortunately you have to remove the console fascia to get to it.
t

yeah this is so painful to do... the amount of times ive tried and its still not 100% you just end up giving up lol its the worst design

[acarmody]

yeah this is so painful to do... the amount of times ive tried and its still not 100% you just end up giving up lol its the worst design

Super glue FTW. Just saying.

[ALL-STOCK-VY]

yeah recon i might just glue it lol, do i have to take the whole selector out... or can i just take like the main facia off and get to it..?