Results 1 to 12 of 12
Like Tree1Likes
  • 1 Post By ivabiggen

Thread: Question About Wheels On VY

  1. #1
    Ride
    VT

    Join Date
    Dec 2011
    Location
    Melbourne
    Posts
    6

    Default Question About Wheels On VY

    I Just bought a set of 19 inch VE SSV wheels and tyres which I got really cheap, I understand I need to have them machined to fit my vy ute but im wondering if the standard tyres which i believe are 245/40/19 will fit without any issues, the main thing im concerned about is if it changes the speedo reading? Also would there be any rubbing issues or would i need to go down tyre size??

  2. #2
    TMM's Avatar
    TMM
    TMM is offline OEM+
    Ride
    VY Berlina S2

    Join Date
    Jun 2008
    Location
    VIC
    Posts
    863

    Default

    speedo will probably be out about 5ks (reading too low, you'll be going 105 when it says 100)

    Shouldn't rub. Ideally you should have 245/35R19.

  3. #3
    Ride
    VY II Acclaim

    Join Date
    Jun 2011
    Location
    Shellharbour
    Posts
    73

    Default

    I just put a set of 19's on my car last week. I got a set of 245/35/19, haven't noticed any difference in the speedo. The diameter of the whole wheels, including tyres, is pretty much the same as it was when it was stock. Because my 15's had thicker tyres. And there's no issues with rubbing, plenty of clearance. Too much IMO, I'm now looking into lowering.

  4. #4
    DevilDRake's Avatar
    DevilDRake is offline Braaaap
    Ride
    2013 SV6-Z Manual Ute

    Join Date
    Oct 2009
    Location
    S.E VIC
    Posts
    977

    Default

    245/40/19 will hit the front strut tower. You'll need new tyres for the front.

    Speedo will be out about 3-4k's as TMM said.


    Quote Originally Posted by perkoracin
    it like u pull at to a red light and they go o its that fag from just Commodores and it like u go tohe drags and ur car runs a like a 9 sec run as a eg and theres run a low 14 um i would Lol so hard like Epicly and then call them The Internet Mouthers and no go Lol thats a eg they might have Fast as rides 2 but may not sound as a Nice small block chevy with a Supercharger on it lol.

    Click here for my new 2013 SV6-Z Manual Ute!


  5. #5
    Ride
    VT

    Join Date
    Dec 2011
    Location
    Melbourne
    Posts
    6

    Default

    If I change all the tyres to 245/35/19 it then shouldnt be out on the speedo?this is just my main concern because I can't afford to lose any more points

  6. #6
    Ride
    VY II Acclaim

    Join Date
    Jun 2011
    Location
    Shellharbour
    Posts
    73

    Default

    You should go 245/35/19 purely because it still leaves clearance above and around the whole wheel. And AFAIK, ur allowed to get away with 10% above the speed limit because speedo's can legally be 10% innaccurate (is that correct?). So having the speedo at most 5 km/h off isn't gonna cause you any grief.

  7. #7
    Ride
    2003 VY Commodore SS 5.7L M6

    Join Date
    Feb 2012
    Location
    Adelaide, SA
    Posts
    29

    Default

    Quote Originally Posted by CJAff View Post
    You should go 245/35/19 purely because it still leaves clearance above and around the whole wheel. And AFAIK, ur allowed to get away with 10% above the speed limit because speedo's can legally be 10% innaccurate (is that correct?). So having the speedo at most 5 km/h off isn't gonna cause you any grief.
    If you're speeding they'll fine you regardless of how accurate your speedo is. Get hold of a GPS that gives you a speed reading, get on the open road and put cruise on so that it can read accurately and double check how far out you are so you know for sure. Trying to use your speedo as an excuse for speeding will only dig your hole deeper.

  8. #8
    Ride
    HSV VZ LS2 Senator

    Join Date
    Jun 2006
    Location
    Sydney/NSW
    Posts
    1,331

    Default

    245/"40"x18 will rub especially on the front struts so sell off the tyres if they are any good and get some 245/"35"x19 and you shouldn't have any problems.

  9. #9
    Ride
    VT

    Join Date
    Dec 2011
    Location
    Melbourne
    Posts
    6

    Default

    thanks guys, just gonna get the new tyres and hopefully sell the old ones! and get the speedo calibrated.

  10. #10
    Ride
    VY II Acclaim

    Join Date
    Jun 2011
    Location
    Shellharbour
    Posts
    73

    Default

    Hey, don't know if you're still interested, but i found this tool online:

    Tyre Calculator - Alloy Wheels - Specialist supplier of alloy wheels and tyres packages, Fast Delivery, Buy Online.

    The difference % is what you're looking at, obviously the lower the better. It's also cool that it gives you a rough speed difference estimate

  11. #11
    ivabiggen is offline Banned
    Ride
    vz Executive

    Join Date
    Aug 2011
    Location
    BF BEND
    Posts
    182

    Default

    Quote Originally Posted by nicko92 View Post
    If I change all the tyres to 245/35/19 it then shouldnt be out on the speedo?this is just my main concern because I can't afford to lose any more points
    sorry to get off the subject but i'd like to know how can you lose DEMERRITS, points are accrued not lost,please stop perpetrating this URBAN MYTH.

  12. #12
    Ride
    VY Commodore Equip

    Join Date
    Feb 2012
    Location
    Tassie
    Posts
    4

    Default

    Quote Originally Posted by CJAff View Post
    You should go 245/35/19 purely because it still leaves clearance above and around the whole wheel. And AFAIK, ur allowed to get away with 10% above the speed limit because speedo's can legally be 10% innaccurate (is that correct?). So having the speedo at most 5 km/h off isn't gonna cause you any grief.
    This is no longer true , you can be fined for going even 1km/h over the limit and if you try to use the excuse "my speedo must be alittle out" then they can defect your car.

Similar Threads

  1. Upgrading wheels question
    By ZaRnOw in forum VT - VX Holden Commodore (1997 - 2002)
    Replies: 7
    Last Post: 02-03-2012, 09:32 AM
  2. VE wheels on Pre Ve , Nuts question lol
    By Trayner in forum General
    Replies: 7
    Last Post: 29-12-2011, 01:54 PM
  3. Wheels question
    By VS FTW in forum VR - VS Holden Commodore (1993 - 1997)
    Replies: 8
    Last Post: 13-07-2011, 10:17 PM
  4. Mag Wheels Question
    By Gazza2005au in forum VR - VS Holden Commodore (1993 - 1997)
    Replies: 6
    Last Post: 15-05-2010, 11:22 PM
  5. Wheels offset question
    By nilprapai in forum VT - VX Holden Commodore (1997 - 2002)
    Replies: 1
    Last Post: 02-05-2006, 10:32 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95