LinkBack URL
About LinkBacks
Reply With Quoteunder controlled conditions.. its should do 210+..... if u can find a straight long enough... thats at stock
Speed Auto V6
what should my 2003 vy executive do speed wise. its an auto
Never Late In My 3.8
under controlled conditions.. its should do 210+..... if u can find a straight long enough... thats at stock
thats alright, what sort of inexpensive mod could i do
Hey mate, as said above 200+
Mods umm depends how much you want to spend, exaust, extractors, induction kit, ratio rockers, different diff ratio are probably the cheapest basic bolt on, or you could supercharge it etc, which is quite expensive.
do you plan to try and go 200 + ???
i wouldnt reccomend it.
RAPTR6
What sort of result do you want from your inexpensive mod?
A K&N filter panel might be the kind of inexpensive mod useful for you
Last edited by Raptorsc; 07-10-2007 at 06:41 AM.
Raptor Superchargers - Boosting S1/S2 3800's, Ecotec's, Alloytec's and 304's
Never Late In My 3.8
these speeds should be done in controlled conditions.. but yeh the more u wanna spend... the faster itll go i guess
Yeh... i really just wanna lower the revs at higher speeds but also have more pickup lol
Never Late In My 3.8
15.37 @ 147 KPH
LOL have you tried?Originally Posted by 03vyPplater
96 EF2 Futura I6 Auto SedanSuperlows Front/Rear with Monroe GT Sport's, EL XR Front, 16" Tickford Wheels with 225/50 Wanlis
, 5% Tint, Sony Headunit/ 6 1/2" 190w Speaker's, Fram Air Filter/XR6T Snorkle, Pacemaker 4499's/Hi Flow Cat/2.5 inch Redback, 4.11's/LSD
15.37 @ 147 KPH
what would it cost to supercharge my v6 and how could i do it?
would i have to change gear ratios etc
RAPTR6
Madgamer
Its the easiest thing to do, Raptor makes everything simple for the customer. Kit is pretuned etc and if you need fitting then we can recommend you someone, not sure where you are located in AU.
Will pm you the cost of our 280kw (Engine) system for VY executive
Raptor Superchargers - Boosting S1/S2 3800's, Ecotec's, Alloytec's and 304's
RAPTR6
I will put in a rough figure for charger kit complete minus tune and intercooler = $4200 for 10psi to suit VY Ecotec.
Others can put in some figures for the other bits.
Raptor Superchargers - Boosting S1/S2 3800's, Ecotec's, Alloytec's and 304's
Posting Permissions
