Interior door trim.

[younglion]

hey guys looking for a thread about removing interior door trim so i can change the stock speakers, and i cant find one? im sure i saw one here before has anyone got a link? for a VY BTW

[Lumps of cheese]

Pm sent.....

[younglion]

thanks mate! so there is no clip behind the window winder like my VT had??

[Lumps of cheese]

Ahhhh, do you have power windows?
Those instructions i sent you were based on power windows.You would still have the clip if you've got winders.

[Conkster]

Ahhhh, do you have power windows?
Those instructions i sent you.

reckon you could just post them up? im interested in how to remove it aswell.

[Lumps of cheese]

reckon you could just post them up? im interested in how to remove it aswell.

Here you go...

There are threads here on it but basic rundown is as follows,
Undo the screws around the outside of the trim also along the bottom as well.
Grab a small flatblade screwdriver and gently remove the red section of your door lock, this will allow your lock to come free, undo the screw behind it and remove the rest of the lock trim.

Use your flatblade to also remove the plastic grommet covering the screw for your door handle.Undo the screw for your door handle and remove the handle, it will still be attached to the arm but pulling it out on the right angle will free it.Undo the screw behind the handle, don't forget this one as some do!

Remove the plastic air vent (based on front door) in the corner, this is just held in by a plastic clip so be gentle with it.

You should be able to free the skin now, having your window down makes it a bit easier, pull the skin toward you from the bottom and then lift up and your skin should be free.Reach around the back and disconnect the plug for the mirrors and your skin will be completley off the car.

This is a rough guide so take your time.I'e done heaps now and have them off in minutes so they're fairly straight forward, just take notice of how everything comes off and you should be sweet.
__________________

[CANYONERO]

i was so aprehensive about ripping the door trims off in the VY but once i got stuck into it i found it easier than the VS to remove. so relieved.

[bluethunder_69]

does anyone have any pics for this procedure? im looking to do this soon aswell and dont wanna ruin anything

[Lumps of cheese]

does anyone have any pics for this procedure? im looking to do this soon aswell and dont wanna ruin anything

I'm doing a speaker install on my ss on friday, i'll take some pics and post them up for you over the weekend.

[bluethunder_69]

cheers mate

[Lumps of cheese]

cheers mate

Refer to this thread here, just put it up.
http://forums.justcommodores.com.au/...door-trim.html

[bluethunder_69]

thanks mate very informative. are those clips on the door demister vents easy to break?

[Lumps of cheese]

thanks mate very informative. are those clips on the door demister vents easy to break?

Nah they're pretty robust.You just gently pull it outwards and it'll come free.

[bluethunder_69]

like outwards away from the door or pull it off at an angle away from the door?

[Lumps of cheese]

Pull it away from the door.

[bluethunder_69]

cheers mate