Results 1 to 8 of 8

Thread: Stalling when changing fuels (LPG conversion)

  1. #1
    The Moose is offline The Moose
    Ride
    VY series1 Commodore exec

    Join Date
    Feb 2008
    Posts
    2

    Default Stalling when changing fuels (LPG conversion)

    I have just had an imco LPG tank installed in my VY and it seems to be running perfectly.

    The only issue I have is that when I flick the switch to change from petrol to LPG the engine stalls. If I change from LPG to petrol, there isn't a problem.

    I was advised to change fuels with the engine running and the car stationary, but I don't rememebr being told the car would stall when changing from petrol to LPG.

    Can someone please let me know if this is correct as I contacted the installer who said that it will stall and they told me that when i picked the car up......I can't recall.



    Thanks.

  2. #2
    crazywog's Avatar
    crazywog is offline VS V6 ECOTEC KING
    Ride
    my fully shick holden bro

    Join Date
    Oct 2006
    Location
    In my fully shik holden bro
    Posts
    119

    Default

    id say just go straight gas coz duel fuel is always problems like ur having now is a big problem. i got told change fuel while the car is turned off and ur only got the necesity on and all ur lights are flashing on ur dash board it should work fine.
    RAJAB RACING
    FullBOOST
    PRESTON AUTOMATICS & DIFFERENTIALS
    etstreet.com

  3. #3
    Ride
    VX Calais 01 3.8lt Ecotec

    Join Date
    Jul 2006
    Location
    Melbourne
    Posts
    1,216

    Default

    crazywog, why do you need lights flashing ?

    Moose, mine is exactly the same and all newer systems are like this, well most, yes no drams switching to petrol except some rough idle, but petrol to gas, do it with your car turned off, and just turn it over, do not touch the accelerator or give it throttle or it will backfire. The gas reaches the cylinder in a different manner, longer, plus all the petrol needs to be out as lpg and petrol do not mix well ! For some reason the older cars didnt stall, dunno why.

  4. #4
    The Moose is offline The Moose
    Ride
    VY series1 Commodore exec

    Join Date
    Feb 2008
    Posts
    2

    Default

    Thanks VXCALAIS - I was hoping someone with some experience could help me.

    ps: I don't know what he was on about with the flashing lights comment???

  5. #5
    Ride
    1998 VT SS

    Join Date
    Mar 2006
    Posts
    42

    Default

    Do you have the old mixer setup or the newer vapour injection. With the old system you can't switch from petrol to gas by just flicking the switch. What you would need to do is get the revs up on the car and then flick the switch over and it will not stall. If it is the new vapour injection setup you should be able just change from one to the other no problem.

  6. #6
    Ride
    VX Calais 01 3.8lt Ecotec

    Join Date
    Jul 2006
    Location
    Melbourne
    Posts
    1,216

    Default

    Mine is the mixer setup. A VN that i drive regularly, old setup switches to both regardless of idle or driving.

  7. #7

    Join Date
    Nov 2007
    Posts
    156

  8. #8
    Kikki's Avatar
    Kikki is offline WA Cruise Moderator
    Ride
    08 VE SSV Sportswagon & 98 VT Berlina Wagon

    Join Date
    Aug 2007
    Location
    Eaton, WA
    Posts
    455

    Default

    My car is a little rough when I switch it from pertol to gas, but cant feel a thing when switching from gas to petrol, dad said something about "One squirts & one Farts" I guess he was saying something about the difference between Gas & Fuel.

    And as for the "i got told change fuel while the car is turned off" comment... umm as far as my car goes yu cant. I always change mine when sitting with the car running, rev it slightly (as blownba said) and change it.

Similar Threads

  1. Stalling (auto V6) when changing from reverse to drive. Help!
    By pugga in forum VR - VS Holden Commodore (1993 - 1997)
    Replies: 3
    Last Post: 25-01-2008, 07:32 PM
  2. united fuels
    By Boonz in forum General
    Replies: 12
    Last Post: 05-09-2007, 08:22 PM
  3. Stalling when changing gears(N or R to D) - cleaned IAC?
    By Raging Bull in forum VR - VS Holden Commodore (1993 - 1997)
    Replies: 3
    Last Post: 11-05-2007, 01:44 PM
  4. Stalling when changing gears
    By fitzy2005 in forum VR - VS Holden Commodore (1993 - 1997)
    Replies: 20
    Last Post: 10-10-2005, 06:46 PM
  5. alternative fuels
    By HDT_aero in forum General
    Replies: 3
    Last Post: 11-05-2005, 11:54 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72