Nic's VYS S1 Manual now Rear Bagged

[Nic92]

hey mate could u please post up the dimensions of your sub box?

here is the design, i had to modify the port to fit sub so i added the new port to the design > 6.9cf tuned @ 32hz before displacement

[VR028]

thanks for that mate

[Nic92]

got my steering wheel controls & facia today, can't wait to connect it

[Nic92]

a little problem with the wiring harness they gave me, wished it was all plug and play but on there ISO the Amp Rem is the illumination , so when i put the acc on, the head lights turned on, steering wheel controls work & are awsome i just gotta mod this wiring harness then it will be all good , one other thing, there was no tel mute wire on it, hmm i wonder why i guess i don't need that connected

[Nic92]

it was just the Amp Rem was into the Illumination & there was no Tel Mute & no Park Brake wire on it so its all fixed now, head unit is in, gauges are out (there stuffed) and yepp i do my soldering on the floor in my room :P



and my second bulk pack of Solavis SuperShield, it was around $120-$140 for a door kit of dynamat so i was like fk it and got a bulk pack of Solavis & its just as good as dynamat, so now i can do all 4 doors when i make new pods, and il ahve some left to put elsewhere, any ideas on where i should put it? the boot is already 90% covered in it lols

sound comp on the 25th can't wait to see my results

[Nic92]

wants to get started on the speaker pods 2morro

[Nic92]

speaker pods went alright but.. the door trim don't fit back on.. the midwoofers are to deep -.-

so i deadened the doors instead.

and no i didnt seal it with the mdf or w.e you use, im not a SQ freak! and i didnt feel the need for it. and i couldnt be bothered lols, it does sound much better than before thou, i have a couple sheets left, just thinking on where to put them, should i finish the boot off? theres pictures of what i have done in the boot on page 5

thanks

[sweefu]

Should have done the MDF mate!! Takes no time at all, costs next to nothing and makes the largest difference in midbass.

[Nic92]

Should have done the MDF mate!! Takes no time at all, costs next to nothing and makes the largest difference in midbass.

yeah i didnt know what to do either, and idk where to find the mdf because where i got my 16mm thats all they had.. and umm, i could always do it later if im that desperate :P, just rip the sheet off that i got covering the hole and i got a couple spare sheets anyway

i don't think it matters, i got next to no midbass at all with these coaxials lols,

and im connecting mono amp to head unit 2morro, desperate for my bass when i go back to Tafe on thurs

[sweefu]

Don't you have a Bunnings close by? Or a timber yard? Both will have.

[Nic92]

i got my 16mm from Bunnings and all they had was 16mm in different sizes last time i went because i asked them if they had other mdf with different thickness

[Nic92]

heres some pictures of what i done today,
[*] such a mess hehe.. finally wired rca from mono amp to head unit and re did the amp remotes because when JB Hi Fi installed them that time they connected the amp remote wire to the Antenna Trigg which i thought was pretty stupid and now its connected to the "Amp Rem" on the back of the head unit.
[*] fitted the VY SS Head Lights (and btw.. with the indicators... it was a strait swap. ppl said i would need to buy new globes because apparently they are clear with orange lens.. well they were orange globes and all good
[*] changed fog lights globes to DiamondVision, same as head lights now (just for looks)
[*] fixed up the fog light wiring.. before it was just hanging under the car shared ground etc, now its wired up behind head light and throught the back of the engine bay around to the battery and to the relay and connected to the other fog light neg and strait to the battery terminal

[Nic92]

yay

[a,vy!]

Man thats allot of bass, Im gonna record mine see how well I goo. I like abit of bass, but more loud music tbh. How many amps you running? Ive got 5 in atm and the two 15's. Ill record mine now.

[Nic92]

Man thats allot of bass, Im gonna record mine see how well I goo. I like abit of bass, but more loud music tbh. How many amps you running? Ive got 5 in atm and the two 15's. Ill record mine now.

umm 2, with 4 coaxial speakers lols, i need a door pod like urs but for single 6.5" speaker, really want to get these re splits fitted

i saw the video.. cool bananas

[a,vy!]

Was gonna turn the sub right up, it was on the lowest setting through the head unit.

[Nic92]

Was gonna turn the sub right up, it was on the lowest setting through the head unit.

should of :P

speakers are clear as

[a,vy!]

I hate that bass though, I got it tuned so it kicks more then doff doff, if you no what I mean.

[HoZy]

I'm going to say this once...

I don't care how loud your subwoofer is, If the rattles make it sound like shit...

Cheers
Mat

[Nic92]

I'm going to say this once...

I don't care how loud your subwoofer is, If the rattles make it sound like shit...

Cheers
Mat

im not into SQ as much as you, sorry

[sweefu]

It has nothing to do with SQ, your car just rattles very badly, I've seen much louder cars with zero rattles.

[Nic92]

It has nothing to do with SQ, your car just rattles very badly, I've seen much louder cars with zero rattles.

ohh ok i havnt, and idk how to stop them

[hakhawk]

ohh ok i havnt, and idk how to stop them

learn, its really not that hard. expandafoam + sikaflex + sound deadener + a weekend of funtimes. makes the car so much more enjoyable to be in

[Nic92]

learn, its really not that hard. expandafoam + sikaflex + sound deadener + a weekend of funtimes. makes the car so much more enjoyable to be in

wtf is expandafoam.. and where do you put it ?

[sweefu]

Most places. Put it between metal panels rubbing together/vibrating against each other.