My cammed VY

[DevilDRake]

Looks clean man. Weird as well, red around the coils, then the half polished plenum with the see-through CAI lol. Oh and the untouched alternator hahaha.


Polish up the bottom of the plenum, do the alternator and it'll be Mint! How much was the radiator line with the red ends cost you and where from?

[HERONVY]

yeah the alternator spoils it, i have a second hand alternator cover currently being chromed waiting to go on the existing alternator.
The radiator braided hose is just a cover kit for now until i have the money to buy the real thing with speedflow fittings from pit crew.
As far as the plenum goes, im waiting until i put the mace manifold insulator on to fit up the chromed base of the plenum currently being chromed aswell.

pics up when its all done!

Cheers

[HERONVY]

Also will be investing in billet pulleys + Red MSD coil packs asap.

Cheers

[HERONVY]

Update: New parts! and MSD coils are on and running

Will get the car dyno'd after i chuck these in





Al

[HERONVY]

So bit of an update guys!

Purchased the following:

Crow cams stage 2 cam
Viton Valve stem seals
Manley valvespring retainers
Double row adjustable timing chain
Comp valve locks
130lb valve springs

All will be going in with the new rockers hopefully early-mid january by my engine builder along with a new computer+tune

Cant wait

Dyno pics/videos up when it gets done!

Also at some point will have to find the time and money to get the back exhaust tip cut off and a new twin tip welded on, as that square tip is as ugly as sin...

Al

[HERONVY]

MOAR GOODIES!

[SirYesSir]

Looks real nice. My cousin is on his his green P's and he has the exact replica of your car!

[HERONVY]

Thanks

haha wow weirddd, ill have to change mine then slightly! lol :P I like individuality...

Al

[HERONVY]

Update:

So i painted my dash yesterday, this is how it turned out:

Note the bad quality pics, sorry i took some sh!t quality phone pics as my camera is stuffed atm
Also, the top lid is off because it is getting pinstriped



Also, the cam and valvetrain gear + computer goes in thursday

AND Getting the suspension gear put in tomorrow! so should sit about 50mm lower tomorrow

Cheering, Cant wait

Al

[vyseriesII]

Awwe me wants cam . Post up your power results when you get em Al. Not sure if i wanna waste anymore cash.

[HERONVY]

updated info in first post

Cheers, Al

[HERONVY]

update:
Got my lid back today from my mate at work who pinstriped it for me
Turned out really nice, for some its a love or hate thing, i love it personally. If anyone hasnt done this before im claiming originality on this one! where's a copyright when you need it? lol
Old school pinstriping on a new school car

Btw bad quality pic again, i really need a good camera to take photos with



Al

[HEMMIES]

I like the colour contrast between the engine bay and the interior, and the pin striping looks sick. good job man....
post the dyno results once you get it done. what kWs are you expecting from everything? :P

[SVTato]

Power rating?? Lol


Sent from my iPhone using Tapatalk

[HERONVY]

I like the colour contrast between the engine bay and the interior, and the pin striping looks sick. good job man....
post the dyno results once you get it done. what kWs are you expecting from everything? :P

Thanks mate
definately will do, waiting for my next rdo so i can go get it done seeing as i cant get it done atm because i work 11 hours a day mon-friday and need my car for work

Im hoping for 150kws or around that, more would be nice lol

Al

[HERONVY]

[QUOTE=SVTato;2103282]Power rating?? Lol

Unsure as of yet, need to get it dyno'd
The more the better! lol

Al

[HERONVY]

Update:

Diff gears arrived today!
3.73 HSV items baby wooo

No pics as my camera in my phone has finally sh!t itself... need to borrow one of my mates cameras to take pics with :/

Al

[Nic92]

hey, im looking @ getting vz ss tail lights and the dealer on eBay told me they are a straight swap and i wont need to mod the wiring?

what was yours like?

Thanks

[HERONVY]

hey, im looking @ getting vz ss tail lights and the dealer on eBay told me they are a straight swap and i wont need to mod the wiring?

what was yours like?

Thanks

You'll need to shave one of the lumpy things in the plastic cup that holds the wires in because you wont be able to turn the plastic cup to lock it in to the light properly, forget what its called sorry...

And from memory I think on the vy lights theres 3 or so plastic prong things that hold the light in place, the vz ss ones have 4 or 2 I think.

Its not a straight swap over exactly, because the set up is slightly different to the vy series lights.

Not enough to stop putting them in there, but slight little mods will be needed if they are genuine VZ ss items from gm.

Sorry about being unsure, it was a long time ago when I put those lights in.

Let us know how it ends up though!

Al


Sent from my X10i using Tapatalk

[Nic92]

You'll need to shave one of the lumpy things in the plastic cup that holds the wires in because you wont be able to turn the plastic cup to lock it in to the light properly, forget what its called sorry...

And from memory I think on the vy lights theres 3 or so plastic prong things that hold the light in place, the vz ss ones have 4 or 2 I think.

Its not a straight swap over exactly, because the set up is slightly different to the vy series lights.

Not enough to stop putting them in there, but slight little mods will be needed if they are genuine VZ ss items from gm.

Sorry about being unsure, it was a long time ago when I put those lights in.

Let us know how it ends up though!

Al


Sent from my X10i using Tapatalk

alright thanks, they say they are "Genuine" not cheap but totally worth it thou, something different

thanks again mate

[SUP3RST4R_DJ]

pinstriping looks sick with the matte black mate, i love it haha and yeah ive never seen it on a commy, nice work

[HERONVY]

alright thanks, they say they are "Genuine" not cheap but totally worth it thou, something different

thanks again mate

Always worth paying a little more for quality

No worries

Al

Sent from my X10i using Tapatalk

[HERONVY]

pinstriping looks sick with the matte black mate, i love it haha and yeah ive never seen it on a commy, nice work

Thanks :-)

Al

Sent from my X10i using Tapatalk

[VSCharlie]

hey mate, thought i would come and check out your car
love it.

that pin striping on the dash is intense, a very nice touch

[HERONVY]

Thanks mate

Still trying to find time to get some really good pics of it and edited in photoshop using effects, looks cheap in the pics ive posted compared to how it is in real life aha.

Yeah the pinstriping is a bit different, but everyone seems to be liking it atm lol, it really is a love or hate thing i reckon

Cheers, Al