FAT.36L VZ Shaved, 20'z, Slammed, DVD Player, Full Exhaust

[VZnewbie]

Hey man do u hav a clip of your exhaust note?? cheers

[FAT.36L]

Sure Thing Mate I'll Just Wait Til Kezza Puts Up A Vid From Our Last Cruise And You'll Hear It Then

[FAT.36L]

Just Gave Her A Bath And Full Clean Out Today Here Are Some Pics

[VZnewbie]

shes very smick bud, looks good!

[FAT.36L]

Cheers Mate I Gotta Get Around To Taking Off My Back Doors So I Can Shave My Door Handles

[DUK13Y]

ooo.. that sounds cool. Let us know how it goes.

[FAT.36L]

Yer Will Do Im Taking My 2nd Front Bar To Work To Start Shaving It And Moulding My Halo Fog Lights Into It But I Need My Car To Much To Have It Off The Road For To Long

[holden-4-life]

thats fat as
sick number plate too

[FAT.36L]

thats fat as
sick number plate too

lol Thanx Mate I Thought It Might Suit The Car

[FAT.36L]

As You Can See In My Pics I Have A 10 Inch Woffer As Well As A 12 Inch, The 12 Is Desconnected And I Have The 10 Running And Im Going To Ditch The 12 And Run The 10 Its So Much More Puncher Than My 12 Its My Mates From Work And Its The Last Series Of The Earthquake Gear Cost Him $750 And Its 1500Watt(Approx 500 to 600 Watt RMS) And It Shits All Over My 12 Im Just Going To Buy A Diffrent Amp Here Are The Spec's On It

PH5000W/D1

Number of channels: 1/Mono
Class: "D"
Max Power Output: 5000 Watts
Power 2-Ohm Bridged: 1 x 3000 Watts
Power 4-Stereo: 1 x 860 Watts
Damping Factor: >800
Cross Over Slopes: 24dB/OCT
THD: >0.016
SNR: 104dB
Speaker Connections: 8-Gauge
Power/Ground Connections: 0-Gauge
Input Types: Low Level RCA Inputs
Dimensions (HxWxD): 2.375" x 10.125" x 15"
MSRP: $1,399.00

[Zeussy]

That looks tidy as aye man, shiney as a mofo...

So when are you doing your door handles?? are you taking the whole door off, or just the door trim? im sooo close to just doing mine, but keep talking myself out of it! Where are you going to put the poppers? are you going electronic? or manual ones??

At the moment, im seriously thinking about shaving my bootlid - the number plate recess, (as its needs painting anyway...) and fitting it in the bumper, statesman style, and if/when I get a body kit, mount it in there,

Havent started on the bumper yet??

[FAT.36L]

Yer I Started The Bumper Today Im About 1/4 Through It I Have Smoothed It And Up To Glassing The Vent Holes In The Front

For My Rear Door Handles I Am Taking Off My Doors And Doing Then At Work So I Can Take The Sheet Metal Where The Handles Go And I Am Just Goin To Spray It My Self When I Get My New Guard With Flutes And My Custom Bars With Fog Light On

For Poppers Im Going To Have A Look At Button Poppers But If Thats To Hard Im Just Going To Have A Little Puller At The Rear Of My Doors And For The Front Its Going To Be Located Under My Mirror

[Zeussy]

Nice.. keen to see what this bumper looks like...

Little pullers aye? like a cable or something?

For my VH I just extended the rods that the door handle uses to open the latch, and drilled a hole in the weather strip at the base of the windows, and poked it through, can either have it just smooth rod, or weld a bolt (cut down) and put a fancy valve cap, I had sculls for a bit, now cobras.. or an interior door lock pin like the old school cars have inside to unlock/lock the doors....


You any good at painting??!!!!

[FAT.36L]

Nice.. keen to see what this bumper looks like...

Little pullers aye? like a cable or something?

For my VH I just extended the rods that the door handle uses to open the latch, and drilled a hole in the weather strip at the base of the windows, and poked it through, can either have it just smooth rod, or weld a bolt (cut down) and put a fancy valve cap, I had sculls for a bit, now cobras.. or an interior door lock pin like the old school cars have inside to unlock/lock the doors....


You any good at painting??!!!!

Yer Thats What I Was Thinking Of With The Pullers Just Extend The Rod With Some Wire Coming Up With A Little Ball On The End

I Have Done Spraypainting At Tafe And Abit At Work I Dont Have My Own Gun A Gun At Work Has A Decent Gravity Feed Gun So I Just Use That

[Zeussy]

Nice.. should look the goods, want to see it done to make my mind up whether or not to do it too. lol,

What about the little line half way down the door, im thinking of shaving that at the same time...



I need a spray painter!! lol... thats why I was asking.. haha

[FAT.36L]

haha Im Good Enogh To Do My Own Shit But Not To Keen To Do Other Peoples Yet Little More Pactice

The Bumper Should Look Good With The White LED Halo Fog Lights

[Zeussy]

Yeah thats about my level, (you're probly even better than me) lol, dont mind ****ing my own shit up, but not someone else's!!


Have you got the foggies yet? or a photo?

[FAT.36L]

Nar Not Pics Yet Banks has Them In His SSZ Ute Have A Look At His Thread

[FAT.36L]

Abit Of A Change To My Car Guys

Im Getting Air Bags For The Rear Form A Mate, He Was Going To Put Them In His VY But Done want Them Any More So I Have To Do Major Chopping To the Rear So It Can Lay On The Ground So I Have A Shit load To Do Before C4C6 So Now Heres The List
Shaved Rear Doors
Smoothed Front Bar And Halo Foggies
Bagg's In The Rear
Sentor Or SSZ Flutes In Guards (Not Sure Yet Witch 1's)
New Shocks
And Paint The Bar, Guards And Doors

Mmm So Much To Do So Little Time And Money

[DUK13Y]

That line up sounds awesome. lol.. money is always the deciding factor isn't it

[FAT.36L]

Yer I Know i should Have The Funds

[FAT.36L]

Im Going To Save A Fair Bit Of Money On The Painting, Shaved Doors, Putting The Bags In And Smoothing The Front Bar With Foggies Cause Im Doing That All Myself So I'll Do Afew Sum's And Get Back To Use With A Final Cost

[Zeussy]

Abit Of A Change To My Car Guys

Im Getting Air Bags For The Rear Form A Mate, He Was Going To Put Them In His VY But Done want Them Any More So I Have To Do Major Chopping To the Rear So It Can Lay On The Ground So I Have A Shit load To Do Before C4C6 So Now Heres The List
Shaved Rear Doors
Smoothed Front Bar And Halo Foggies
Bagg's In The Rear
Sentor Or SSZ Flutes In Guards (Not Sure Yet Witch 1's)
New Shocks
And Paint The Bar, Guards And Doors

Mmm So Much To Do So Little Time And Money

Thats a nice list.. how long away is c4c6??

Have to get some fronts air struts eventually... get it on the rail aye!
Its a must have - some progress shots..

[FAT.36L]

Year Man For Sure I Will Adventualy Get The Front But Not Just Yet

C4C6 Is On Saturday 8th July So I Gotta Get My Finger Out And Get It Done

[FAT.36L]

Im Almost Finshed My Front Bar I Spent 8 Hours On It Today And I Just Gotta Buy My Halo Fog Lights Now And Thats It, It Just Needs Painting

Next On The List Is Doors And Then SSZ Or SV6000 Flutes