Results 1 to 8 of 8

Thread: Smokers Pack install

  1. #1
    Ride
    VZ 5.7 Calais

    Join Date
    Oct 2008
    Posts
    6

    Smile Smokers Pack install

    I have a 05' V8 Calais and I want to install a smokers pack in. The reason for this is to have another poweroutlet for the GPS rather than use the one in the console.

    Anyway I want to know if the wiring is there already behind the compartment and it is just a matter of installing it and plugging it in etc. Also after a bit of searching I have a part number of 92146373 and an approximiate cost of around $50 from holden....does that sound right?

    Any advice/photo's on how any of you out there have done this mod would be great...

    Cheers and thansk in advance...

    Andrew

  2. #2
    Ride
    VZ Calais MY06

    Join Date
    Nov 2006
    Location
    Canberra, ACT
    Posts
    267

    Default

    I was considering doing the same thing once. I think another good option for your GPS is to just tap into where the fuses are below the steering column and run a cable out from there. You will need to convert the power source to the right voltage etc but that should be easy to do by dismantling a cigarette lighter to USB converter. I was considering doing that with mine but I am happy enough with running it from the centre console.

    Just a thought.

  3. #3
    bludeck's Avatar
    bludeck is offline Wishlist = Blowa
    Ride
    VZ Wagz

    Join Date
    Dec 2007
    Location
    Gold Coast
    Posts
    152

    Default

    ive got a double adapter power 12v cigar lighter style installed on the bootom of the glovebox exterior. works great for gps and phone charger.

  4. #4
    Ride
    VZ 5.7 Calais

    Join Date
    Oct 2008
    Posts
    6

    Default

    Thanks for the idea's but I would prefer to have the smokers pack with the cigerette lighter for mobile phone charging and GPS duties. At some stage I am going to install a UHF radio as well (remote head type not sure which one yet) and I will look at hardwiring that in the electrics somehow or straight to the car battery (looking at 25 watt UHF radio).

    So has anyone out there installed a smokers pack in a VZ?? IS the wiring for it there behind the compartment under the radio???

    Cheers

  5. #5
    bludeck's Avatar
    bludeck is offline Wishlist = Blowa
    Ride
    VZ Wagz

    Join Date
    Dec 2007
    Location
    Gold Coast
    Posts
    152

    Default

    thats what i installed, a double cigerette lighter for power duties, ie, phone + gps, hidden on the bottom of the glovebox hardwired to acc 12v and is great ie, no wires everywhere.

  6. #6
    Ride
    VZ SV6

    Join Date
    Aug 2008
    Posts
    248

    Default

    if you remove the kickpanel/trim on driverside of centre console, you will see a white 3 pin connector clipped into framework under the radio.(possible same wire harness as the VT-VX days but no longer needed so just hidden away. as the VT-VX had a "power outlet " located in lil tray rather then centre console)) 1 pin is negative the other one is +12v acesories(ideal for GPS,etc etc) the other pin is +12v on light circuit(ideal for footwell lights ie neons etc).
    this is the same connector used to plug the smokers pack into but why pay, for a lil bit of wire?
    as my tom-tom came with a car kit( reduced 12v to 5.5v. straight 12v will kill your gps) i wired it straight into the plug and also used the same plug for 2 small green neons for front footwells.

  7. #7
    Torquative's Avatar
    Torquative is offline go in Luxury
    Ride
    Grandpa Spec WK Statey

    Join Date
    Jun 2005
    Location
    Sydney
    Posts
    1,530

    Default

    yes, Ive done exactly that fitted a smokers pack for the GPS.

    Remove the center console panel around the gearstick/window switches. Remove the panel around the radio and AC controls (theres tonnes of topics with the how to)

    Unscrew the old flip down compartment

    You'll see a plug hard wired in there. Just shove the smokers pack in and the plugs line up perfectly. Re-screw in and reverse the process to put the dash panels back on.

    $50 sounds right, you also need the new cover panel which is sold seperately and this depends on your interior colour, dont know if Holdens included that in the price they quoted or not.

  8. #8
    Ride
    VZ 5.7 Calais

    Join Date
    Oct 2008
    Posts
    6

    Default

    Thanks for the info all...

    Torquative when you mention I would need a new cover panel which cover panel are you refering to??

Similar Threads

  1. Smokers Pack Install Help
    By ansett727rma in forum VE Holden Commodore (2006 - ?)
    Replies: 11
    Last Post: 20-09-2011, 06:10 PM
  2. 4.11 Diff Gears To install or not install
    By ScoHar in forum VN - VP Holden Commodore (1988 - 1993)
    Replies: 6
    Last Post: 23-04-2009, 10:14 PM
  3. VY S-pack foglights install question
    By HoldrodeoLT in forum VY Holden Commodore (2002 - 2004)
    Replies: 6
    Last Post: 04-09-2008, 02:48 PM
  4. install stock cruise on a vn s-pack
    By stackner in forum VN - VP Holden Commodore (1988 - 1993)
    Replies: 24
    Last Post: 05-06-2005, 11:46 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72