How to reset head unit?
Ok so i put a different head unit in my ute and used the wrong code. It activated but now the steering wheel controls are not working. So i am thinking its because the code was wrong!
How do i go about resetting the head unit so as to enter in the correct code?
Cheers
disconnecting the battery should allow you to re enter the pin.
Now in a Calais
I highly doubt that entering the wrong code would activate the head unit without steering wheel functionality.
Wrong code = no activation.
Take it out again and double check the wiring.
So you put a different Blaupunkt unit in right??
Yea Kal put a head unit out of my vy in. The one in the vz was scratched to buggery. any ideas?
Ahhh Yes, Ahhh Yes....
they are not compatible?
aZk.
Wanted to buy:
1. T5 V8 Bellhousing and Clutch fork assembly suit VP
2. V8 Tail Shaft, T5, Suit IRS VP
3. T5 VB Gear Box
PM Me if you got what i need...
Originally Posted by ryno_vrx
Nah it should work fine..
Maybe take it to holden to get it programmed to your VIN.. Should cost $25
Try and put your old one back in aswell, and see if Steering Controls work with that one...?
Hey Kal, i tried putting the old one in and it also doesnt work??? starting to think the controls have died perhaps?
go in Luxury
just FYI the BCM? remembers the PIN for the radio from factory.
When you put a new heard unit in and enter the PIN the BCM remembers that. You can remove the radio in and out and wont be asked for the PIN, until you go and put a different head unit in.
Unplugging the battery etc doesnt really matter, the head unit resets after 15 mins whether its connected or not. just have to wait it out if you've locked it.
Grandpa
almost right
the pin number needs to be programmed into the BCM, once this is done that HU will work in that car without any issues, if the HU pin is different to the number stored in the BCM the HU will need to be pinned each time the power has been off.
Rob
go in Luxury
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote