Hello.
I am new here, and I am from Saudi Arabia.
I have 2006 VZ commodore Executive. I bought it 4 days ago.
When I pressed the brake pedal so hard, the car skidded on the road, like there is no ABS fitted.
Does all VZ Execs have ABS?
And how can I know if there is one or not?
Note: I tested the instrument cluster by pressing set and mode together, and there are an ABS and SRS lights.
Thank you
Last edited by abodah; 13-09-2009 at 12:00 PM.
abs doesnt work all the time, its only suppose to stop u from skidding sometimes, if u slamm the breaks on u gonna skid abs or no abs
not sure if execs dont have it but yeah i think they do i know they dont have traction controll button
Have a look under the bonnet - there should be the ABS system next to the battery - it will have a series of pipes in/out to the master cylinder and wheels.
The left hand side looking back from the radiator toeard the passenger compartment.
If there is not an ABS controller - no ABS.
either way, the brakes on the exec vz are S**T. i have one and they just feel crap, like the car brakes terrible and abs onky works half the time. could just be my car though, lol.
My Silver VZ wagon
Lowered and on Bilstein Coilovers on RJR 18" Wheels
2 hole mod and Cat Back exhaust
wrong abs will stop skids al the time generally over 20km/h though, if it worked 'somtimes' how would it know when to work and when not to,
abs only brings back braking enough to allow a tiny amount of slip, as that is maximum braking effectiveness, thats why you se the wheels and car jitter a bit under hard braking with abs
EASTERN CREEK JCNSW 2009
Originally Posted by Commydoor
if you have heavy duty pads, it wont brake good untill you get them really hot,
general everyday pad will do fine, but everyone always goes for the heavy duty performance pad, then wonders why they dont brake to good, in saying that, i dont know if thats your problem or what pads you have,
when was the last time the brakes were bled? there could be some air in the lines
EASTERN CREEK JCNSW 2009
Originally Posted by Commydoor
Thank you all.
Does the ABS module under the bonnet have MANDO text on it?
If no please someone post a pic of it.
Regards
By the way, My car is brand new, there still are a few new VZs here at the dealer. So the pads are the factory 1s.
Here is a VZ with ABS and a big motor as well![]()
White 05 V6 VZ Executive - Thrashed Ex Telstra car
and 3 Dangerous non ABS VN's
Here is a better photo of a VY ABS module.
White 05 V6 VZ Executive - Thrashed Ex Telstra car
and 3 Dangerous non ABS VN's
nope dosnt appear you have abs, that just looks like a distrubtion valve in lieu of the abs unit
EASTERN CREEK JCNSW 2009
Originally Posted by Commydoor
I did'nt realise they still made Belmont's.
Does it have a heater and carpet?
I'm not afraid.
EASTERN CREEK JCNSW 2009
Originally Posted by Commydoor
Wait a sec i thought all VZ Sedans has abs as a standard. This is odd! Could someone have removed the ABS Module?
I mis-read your original post.
You live Saudi Arabia? I've heard
about you guy's.....
YouTube - Crazy drifting in Saudi Arabia
You don't need ABS. You need traction control!
I'm not afraid.
I live in Saudia, but I am not saudi.
Anyway I appreciate you help. I'll drive carefully from now on.
Thanks again
By the way, I can get used parts cheap in here. Can I fit an ABS to my car?
What parts should I buy? ABS Module, Sensors, etc?
Thanks
As for fitting, I would doubt very much that you could do it without incurring considerable expense. You need more than just a module. You would have to change every brake assembly to one with sensors, change/replace the computer etc. Probably cheaper to buy an upgraded model. Export models of Commodores were not always configured the same as those produced for sale in Australia.
Last edited by Benboy; 15-09-2009 at 10:15 AM. Reason: Spelling