Results 1 to 12 of 12

Thread: VZ front bar?

  1. #1
    Ride
    VZ SV6

    Join Date
    May 2009
    Posts
    84

    Default VZ front bar?

    Hey guys just need some suggestions,

    had a little accident this morning on the way to work (my first accident)
    basicly wasnt paying attention and ran into a big utes tow bar at like 20 km/h lucky no damage to his car guy was alright and we left it at that.

    with my car Silver SV6 in the front bar has a fairly big dint and the damage done ill probs just end up replacing it (lucky bonnet and headlights didnt get broken)

    so yea any nice front bars that will suit my silver SV6 spoiler off and lowered, just wonder what will look good! any suggestions will be appricated!

    thanks!

  2. #2
    Ride
    2004 VZ S-Pack Ute

    Join Date
    Jan 2009
    Location
    Gladstone QLD
    Posts
    254

    Default

    personally i would just buy the same one and replace it but also the clubsport and maloo fronts for the VZ's are hot also the monaro front is good too. (but i think you need diff lights for the monaro front.

  3. #3
    Troy711's Avatar
    Troy711 is offline Moderator Puppeh
    Ride
    2007 WM Statesman

    Join Date
    Dec 2003
    Location
    Canberra, ACT
    Posts
    6,787
    Blog Entries
    1

    Default

    A Monaro front would require at the very least.. bumper, grill, headlights, guards and bonnet.

  4. #4
    Ride
    VZ SV6

    Join Date
    May 2009
    Posts
    84

    Default

    yea nah if i do it just want to be a swap over of the bumper, anyone got a pic of a VZ with just the clubby front? just want to see what it looks like with the standard SV6 kit but clubby front, also if i was to do it what colour should i get the headlight things done it same matt black as the rear bumber on the VZs?

  5. #5
    Escape-The-Fate's Avatar
    Escape-The-Fate is offline HSV, i just want one
    Ride
    VE SS, M6

    Join Date
    Nov 2008
    Location
    Gold Coast
    Posts
    317

    Default

    use the photoshop thread in the pub to get some ideas mate. SSX front bar, clubby bar find a front on picture and put a front on of your car up and they will be able to match colours and all sorts of stuff. if it was me tho i would put a new sv6 bar on it
    Sticking a Chev badge on any Commodore is like putting a Nissan badge on a VL

    EOI....VE SS 18" wheels x4 with 5000k's on new tread, 2 of have very minimal gutter rash (previous owner) otherwise like new send me a pm if interested.

  6. #6
    Calaber's Avatar
    Calaber is offline Nil Bastardo Carborundum
    Ride
    CG Captiva SX

    Join Date
    Nov 2007
    Location
    Lower Hunter Region NSW
    Posts
    2,434

    Default

    Have you removed the bumper facia yet? If the impact was hard enough to leave it with a fair dent, you are bound to find that the bumper reinforcement behind it is history too. They are about $150 or so to replace and are virtually impossible to straighten out because of the type of steel used and the fact that they are a boxed section.

  7. #7
    Ride
    VZ SV6 && 180sx

    Join Date
    Mar 2008
    Location
    Townsville
    Posts
    765

    Default

    Either stick with the SS/SV6 bar, or maybe the Calais or Berlina front bar. My vote would be the Calais front, it's a lot of sex.

    Calais
    http://www.webwombat.com.au/motoring...VZcalais-1.jpg

    Berlina
    http://forums.justcommodores.com.au/...berlina-01.jpg

    Don't get a VY Front haha
    http://forums.justcommodores.com.au/...sc00295223.jpg

    WTB: VZ Chasers

  8. #8
    Ride
    VZ SV6 && 180sx

    Join Date
    Mar 2008
    Location
    Townsville
    Posts
    765

  9. #9
    Troy711's Avatar
    Troy711 is offline Moderator Puppeh
    Ride
    2007 WM Statesman

    Join Date
    Dec 2003
    Location
    Canberra, ACT
    Posts
    6,787
    Blog Entries
    1

  10. #10
    andyman's Avatar
    andyman is offline The Only 6sp VZ Wagon
    Ride
    2012 BT50 4x4, 84 Hilux 4x4 & 05 Husky TE450

    Join Date
    Mar 2005
    Location
    Nowra, NSW
    Posts
    3,692

    Default

    all i can say is dont get fiberglass...... yick


    EASTERN CREEK JCNSW 2009

    Quote Originally Posted by Commydoor
    First of all your words cannot harm me cause my ego is like a shield of steel.

  11. #11
    Ride
    2004 VZ S-Pack Ute

    Join Date
    Jan 2009
    Location
    Gladstone QLD
    Posts
    254

    Default

    Quote Originally Posted by Troy711 View Post
    VY front on VZ is LOL!!! HAHAHA
    Unless you get the VY lights to match its a very silly idea lol

  12. #12
    Ride
    VZ SV6

    Join Date
    May 2009
    Posts
    84

    Default

    yea the dint wasnt that hard, didnt even crack the bar, gonna see if the panel beater can heat it up pop it out bog it up and ill get it painted, if not ill probs end up going for the clubby front bar but we will see.

    thanks for all the suggestion

Similar Threads

  1. [SA] WTB - VT front left 1/4 panel & front passenger door
    By gsxrdan in forum Swap / Wanted to Buy / Trade
    Replies: 1
    Last Post: 17-04-2009, 05:11 PM
  2. Vp Calais Parts, Front Driver Side Door and Front Quarter Panel
    By coops_23 in forum Swap / Wanted to Buy / Trade
    Replies: 1
    Last Post: 16-05-2008, 09:34 PM
  3. Vr/s Senator Front Bar + Grill *genuine* / Vt Calais Front Bar + Chrome Grilles
    By petezor in forum Parts And Other Items For Sale
    Replies: 3
    Last Post: 02-02-2008, 11:42 AM
  4. WTB: VK door, front bumper, front right quarter panel
    By craigvk in forum Swap / Wanted to Buy / Trade
    Replies: 0
    Last Post: 05-07-2006, 05:02 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72