rear power windows

[henrytad]

hey guys, i want my rear windows to be power as well instead of the winder. has anyone done this before? who could help me out. im also willing to pay if someone can do a good job

[TMX]

If its your commy, when would u ever need to sit in the back?

[henrytad]

just when i got mates in the back n stuff, i hate wen they keep winding up n down the windows. id rather it b power windows

[VesperZ]

Seems like more trouble than it's worth, not only do you have to replace your regulators with electric ones, I'm not entirely sure if your model already has the wiring, but you'd require the following items for it to work:
- Door trims (without the manual regulator holes)
- Electric window regulator
- Wiring Loom (if not pre-existing)
- Electric window buttons (front & back)

I think there are kits on eBay, or sometimes people remove it from wrecked vehicles and sell them on eBay as a package, but it's not going to be cheap and there's a bit of work involved.

[dans_vz]

Its actually not too hard to do this, im about to do it to my executive, just remove the centre console switches and replace it with the 5 button one, it is a straight swap. You should have wiring to the middle pillar, so you will only need the door looms which plug into the main loom in the middle pillar. Then its just a matter of replacing the manual winders and the door trims with the electric equivalent.

[-scyth-]

Henrytad

Its a very easy process to do. Check out my profile as ive done this to my wags.

Parts you'll need are....

2x rear window switches ($45 total from Holden)
2x door looms ($10 total wreckers)
2x door trims ($120 total wreckers)
2x motors (from vx onwards is fine $40 total from wreckers)
main console switch ($50 wreckers)
I had phreddy come in & install em for me & they were a piece of piss. the wires are already in place & once you have the looms its a no brainer.

I might have door looms spare for you if your interested.

Just lemme know