Results 1 to 20 of 20

Thread: oil change on alloytech

  1. #1
    06vzcalais is offline Donating Member

    Join Date
    Aug 2009
    Posts
    327

    Default oil change on alloytech

    Looking at doing my first service on an alloytech its due for its 120k service, what should i buy other than the obvious oil filter, oil and sump plug

  2. #2
    PaulSV6's Avatar
    PaulSV6 is offline CHE Tuned 156.8rwkw
    Ride
    VZ SV6 M6, MY10 VE SV6 Sportswagon & MY03 XC SRI

    Join Date
    Jun 2008
    Location
    Castle Hill
    Posts
    1,380

    Default

    You dont need a sump plug, there re-usable! just give it a clean before u put it back in.
    Most likely you'll need, coolant, brake fluid, spark plugs these need chaning at 120000.

    Check in ur service interval book under 120,000k Service. This tells u what needs doing, therefore you can determine what u need.
    The Blue One



    Quote Originally Posted by buddaboy1990 View Post
    bahahaha i thought u meant an actual turtle shell.... im such an idiot....
    Quote Originally Posted by STEALTHY™ View Post
    Quoted for truth

  3. #3
    06vzcalais is offline Donating Member

    Join Date
    Aug 2009
    Posts
    327

    Default

    Quote Originally Posted by PaulSV6 View Post
    You dont need a sump plug, there re-usable! just give it a clean before u put it back in.
    Most likely you'll need, coolant, brake fluid, spark plugs these need chaning at 120000.

    Check in ur service interval book under 120,000k Service. This tells u what needs doing, therefore you can determine what u need.
    yeah thanks bro replaced the plugs at 50 000 thanks to united e10 shitty fuel (missus put the fuel in)

  4. #4
    PaulSV6's Avatar
    PaulSV6 is offline CHE Tuned 156.8rwkw
    Ride
    VZ SV6 M6, MY10 VE SV6 Sportswagon & MY03 XC SRI

    Join Date
    Jun 2008
    Location
    Castle Hill
    Posts
    1,380

    Default

    Quote Originally Posted by 06vzcalais View Post
    yeah thanks bro replaced the plugs at 50 000 thanks to united e10 shitty fuel (missus put the fuel in)
    No worries, then. One less item to worry about.
    The Blue One



    Quote Originally Posted by buddaboy1990 View Post
    bahahaha i thought u meant an actual turtle shell.... im such an idiot....
    Quote Originally Posted by STEALTHY™ View Post
    Quoted for truth

  5. #5
    Torquative's Avatar
    Torquative is offline go in Luxury
    Ride
    Grandpa Spec WK Statey

    Join Date
    Jun 2005
    Location
    Sydney
    Posts
    1,530

    Default

    ask Holden if they have a spare SPW kicking round, everytime I service an alloytec I ask them and the local boys always have a spare rubber washer there. Its just me, I prefer to change them.

    Doesnt hurt to ask! Not the end of the world if they dont because they are designed to be reusable, but if you can score one free then even better

  6. #6
    Escape-The-Fate's Avatar
    Escape-The-Fate is offline HSV, i just want one
    Ride
    VE SS, M6

    Join Date
    Nov 2008
    Location
    Gold Coast
    Posts
    317

    Default

    yeah mines due for its 120,000 very soon..was thinking about going down to autobahn and pricing everything up, read the service manual and its oil, filter, air filter, plugs and coolant flush. Was thinking about getting the irridium plugs and maybe a K&N panel filter, anyone think they are either worth it or am i just wasting my dollars?

  7. #7
    BXHD Guest

    Default

    i have a k&n panel filter. i rekn it made a bit of difference. i also have the two hole mod and once the high flow filter went in, i could feel a difference in the higher revs, holds u to the seat a bit harder

  8. #8
    PaulSV6's Avatar
    PaulSV6 is offline CHE Tuned 156.8rwkw
    Ride
    VZ SV6 M6, MY10 VE SV6 Sportswagon & MY03 XC SRI

    Join Date
    Jun 2008
    Location
    Castle Hill
    Posts
    1,380

    Default

    120000k for me is way off

    Then again i might do the sparkies at around 70-75000.
    The Blue One



    Quote Originally Posted by buddaboy1990 View Post
    bahahaha i thought u meant an actual turtle shell.... im such an idiot....
    Quote Originally Posted by STEALTHY™ View Post
    Quoted for truth

  9. #9
    06vzcalais is offline Donating Member

    Join Date
    Aug 2009
    Posts
    327

    Default

    oil change completed piece of cake cant believe i used to pay someone $250 to put crap parts and crap oil in my car. I used a K&N oil filter (came with a nice K&N filter casing to replace the original) and i also ordered royal purple oil for my next change (put penrite in this time), checked and cleaned plugs and cleaned my intake manifold while i was at it, might take to the intake side with a die grinder its a little bit messy. Been reading into a cp6 item but i dunno if the cost VS power is worth it

  10. #10
    andyman's Avatar
    andyman is offline The Only 6sp VZ Wagon
    Ride
    2012 BT50 4x4, 84 Hilux 4x4 & 05 Husky TE450

    Join Date
    Mar 2005
    Location
    Nowra, NSW
    Posts
    3,692

    Default

    Quote Originally Posted by 06vzcalais View Post
    oil change completed piece of cake cant believe i used to pay someone $250 to put crap parts and crap oil in my car. I used a K&N oil filter (came with a nice K&N filter casing to replace the original) and i also ordered royal purple oil for my next change (put penrite in this time), checked and cleaned plugs and cleaned my intake manifold while i was at it, might take to the intake side with a die grinder its a little bit messy. Been reading into a cp6 item but i dunno if the cost VS power is worth it

    i personally wouldnt have wasted the money on royal purp, what grade did you get to cause i wouldnt get anything thicker than 10w-30 for an alloytec


    EASTERN CREEK JCNSW 2009

    Quote Originally Posted by Commydoor
    First of all your words cannot harm me cause my ego is like a shield of steel.

  11. #11
    TVR-190's Avatar
    TVR-190 is offline SkyFall
    Ride
    WK Statesman LS1

    Join Date
    Jun 2008
    Location
    Sutherland Shire N.S.W
    Posts
    2,065

    Default

    Quote Originally Posted by 06vzcalais View Post
    oil change completed piece of cake cant believe i used to pay someone $250 to put crap parts and crap oil in my car. I used a K&N oil filter (came with a nice K&N filter casing to replace the original) and i also ordered royal purple oil for my next change (put penrite in this time), checked and cleaned plugs and cleaned my intake manifold while i was at it, might take to the intake side with a die grinder its a little bit messy. Been reading into a cp6 item but i dunno if the cost VS power is worth it
    theres a guy on here that put a cp6 on his adventra i think. pretty sure he said he got 20kwish
    The Black Beauty



  12. #12
    Ride
    VZ Evec 05

    Join Date
    Jan 2010
    Location
    South Coast NSW
    Posts
    130

    Default

    im a castrol oil man, nulon coolant and ryco or factory filter. iv got the platinum bosch plugs $129 from the local supercheap.

  13. #13
    06vzcalais is offline Donating Member

    Join Date
    Aug 2009
    Posts
    327

    Default

    i got 10W 30. I know drag racers that swear by Royal Purple. CP6 is around 3g not including postage i could strap on a bottle of giggle gas for far cheaper and get better results. ill do a little more research i may find small gains from just cleaning up the factory intake

  14. #14
    06vzcalais is offline Donating Member

    Join Date
    Aug 2009
    Posts
    327

    Default

    Quote Originally Posted by marcdon View Post
    im a castrol oil man, nulon coolant and ryco or factory filter. iv got the platinum bosch plugs $129 from the local supercheap.
    ive got platinum fusion plugs i swear by em had em in the last 3 cars ive owned

  15. #15
    Ride
    VE SV6 ute

    Join Date
    Apr 2009
    Location
    vic
    Posts
    1,619

    Default

    Quote Originally Posted by 06vzcalais View Post
    i got 10W 30. I know drag racers that swear by Royal Purple. CP6 is around 3g not including postage i could strap on a bottle of giggle gas for far cheaper and get better results. ill do a little more research i may find small gains from just cleaning up the factory intake
    CPR6 you mean??

    $1400 special on at the moment if you are. 15rwkw gain

  16. #16
    06vzcalais is offline Donating Member

    Join Date
    Aug 2009
    Posts
    327

    Default

    Quote Originally Posted by kuzman89 View Post
    CPR6 you mean??

    $1400 special on at the moment if you are. 15rwkw gain
    $1400 sounds good do you have a link for this special

  17. #17
    Ride
    VE SV6 ute

    Join Date
    Apr 2009
    Location
    vic
    Posts
    1,619

    Default

    hey mate I don't, I heard off another forum member

    Contact Us, Performance Manifolds

    or just call Phil Corbet on 0439 793 705.

    I was going to, but don't have the funds till after my tax return finally comes through.

  18. #18
    Ride
    VZ SV6

    Join Date
    Aug 2008
    Posts
    248

    Default

    you know Holden wants $10 for just a sump bolt washer.
    so re-use the original if in good nick or gat a pack of 10 from Veale. and it be cheaper
    i got 20Lt of Mobil for the car so oil changes are gonna work out cheaper

  19. #19
    PaulSV6's Avatar
    PaulSV6 is offline CHE Tuned 156.8rwkw
    Ride
    VZ SV6 M6, MY10 VE SV6 Sportswagon & MY03 XC SRI

    Join Date
    Jun 2008
    Location
    Castle Hill
    Posts
    1,380

    Default

    Quote Originally Posted by baracuda View Post
    you know Holden wants $10 for just a sump bolt washer
    Lol, just make one urself!
    The Blue One



    Quote Originally Posted by buddaboy1990 View Post
    bahahaha i thought u meant an actual turtle shell.... im such an idiot....
    Quote Originally Posted by STEALTHY™ View Post
    Quoted for truth

  20. #20
    06vzcalais is offline Donating Member

    Join Date
    Aug 2009
    Posts
    327

    Default

    Quote Originally Posted by kuzman89 View Post
    hey mate I don't, I heard off another forum member

    Contact Us, Performance Manifolds

    or just call Phil Corbet on 0439 793 705.

    I was going to, but don't have the funds till after my tax return finally comes through.
    thanks mate might buy this won some moey on the pokies tonight might put that on the manifold

Similar Threads

  1. alloytech motor?
    By arrow in forum VZ Holden Commodore (2004 - 2006)
    Replies: 7
    Last Post: 22-12-2008, 01:18 PM
  2. alloytech v6
    By sv9946 in forum VZ Holden Commodore (2004 - 2006)
    Replies: 32
    Last Post: 25-11-2007, 06:54 AM
  3. Buick to Alloytech.....
    By The Darkness in forum General Discussion
    Replies: 7
    Last Post: 26-04-2007, 11:32 PM
  4. vz alloytech
    By VNV6VENGEANCE in forum VN - VP Holden Commodore (1988 - 1993)
    Replies: 14
    Last Post: 13-06-2006, 02:25 PM
  5. 190 kw Alloytech V6!!!
    By Wombat in forum General
    Replies: 2
    Last Post: 29-07-2004, 08:50 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72