Page 1 of 2 12 LastLast
Results 1 to 25 of 46

Thread: Alloytec 'tapping' whats your opinion

  1. #1
    impulsive's Avatar
    impulsive is offline Alloytec Racing
    Ride
    VZ Alloytec

    Join Date
    Aug 2007
    Location
    Brisbane, QLD
    Posts
    1,794

    Default Alloytec 'tapping' whats your opinion

    Basically, As a result of minimml oil (im guessing) the motor has picked up a nasty tapping noise coming from the front middle of the motor and increase with the revs. Car has done 105,000 km and is due for a service.

    There are a few things i have been led towards.

    1) The water pump is on the blink
    2) Fingered Cam shaft
    3) Bearing or something similiar

    I will endevour to post a video up of the tapping..
    Life starts at 200km/h

  2. #2
    impulsive's Avatar
    impulsive is offline Alloytec Racing
    Ride
    VZ Alloytec

    Join Date
    Aug 2007
    Location
    Brisbane, QLD
    Posts
    1,794

  3. #3
    Ride
    VZ 3.6

    Join Date
    Feb 2009
    Location
    North of Adelaide
    Posts
    150

    Default

    tapping noise as you put the motor under load? heavy acceleration?
    "And i gave that man directions, even though i didn't even know the way; because thats the kinda guy i am today "

  4. #4
    andyman's Avatar
    andyman is offline The Only 6sp VZ Wagon
    Ride
    2012 BT50 4x4, 84 Hilux 4x4 & 05 Husky TE450

    Join Date
    Mar 2005
    Location
    Nowra, NSW
    Posts
    3,692

    Default

    alot of earlier even upto early ve's get a few light tapping noises around the motor, alot of it comes from valves, might gets a bit of a tap from a timing chain

    its all part and parcel of motors getting really really quiet these days, you hear every little noise,

    thats obviously depending on what your regarding as a tap?


    EASTERN CREEK JCNSW 2009

    Quote Originally Posted by Commydoor
    First of all your words cannot harm me cause my ego is like a shield of steel.

  5. #5
    impulsive's Avatar
    impulsive is offline Alloytec Racing
    Ride
    VZ Alloytec

    Join Date
    Aug 2007
    Location
    Brisbane, QLD
    Posts
    1,794

    Default

    it sounds like a tap EVERY revolution of the motor.. and increases with the revs.. tap a spanner against a hammer lightly and thats the sound
    Life starts at 200km/h

  6. #6
    06vzcalais is offline Donating Member

    Join Date
    Aug 2009
    Posts
    327

    Default

    i get a tapping sound from mine also always have sounds simular to the injector tick on a RB30

  7. #7
    HoldrodeoLT's Avatar
    HoldrodeoLT is offline I have no lemon pledge...
    Ride
    2004 Holden Rodeo RA LT, 2008 Polaris Hawkeye 300

    Join Date
    Aug 2008
    Posts
    184

    Default

    How long did you run on low oil?
    You may have run a channel in one of your rod bearing inserts, this causes the pistons to move a small amount at the big end, making it "knock"..
    There made of aluminium and wear easy if pistons arnt lubricated enough.
    About as handy as tits on a bull

  8. #8
    impulsesv6's Avatar
    impulsesv6 is offline Alloytec Garage
    Ride
    A quick Alloytec

    Join Date
    Dec 2006
    Location
    brisbane, QUEENSLAND
    Posts
    682

  9. #9
    impulsive's Avatar
    impulsive is offline Alloytec Racing
    Ride
    VZ Alloytec

    Join Date
    Aug 2007
    Location
    Brisbane, QLD
    Posts
    1,794

    Arrow

    Here is a short video link, hopefully you can hear the tapping noise

    YouTube - DSCF7800.AVI

    have been told it is cam related or the buckets
    Last edited by impulsive; 08-02-2010 at 05:48 PM.
    Life starts at 200km/h

  10. #10
    andyman's Avatar
    andyman is offline The Only 6sp VZ Wagon
    Ride
    2012 BT50 4x4, 84 Hilux 4x4 & 05 Husky TE450

    Join Date
    Mar 2005
    Location
    Nowra, NSW
    Posts
    3,692

    Default

    ah i remeber something like this from a while ago, its really rare, but remove the valve covers and see if a lifter has fallen off....


    EASTERN CREEK JCNSW 2009

    Quote Originally Posted by Commydoor
    First of all your words cannot harm me cause my ego is like a shield of steel.

  11. #11
    impulsive's Avatar
    impulsive is offline Alloytec Racing
    Ride
    VZ Alloytec

    Join Date
    Aug 2007
    Location
    Brisbane, QLD
    Posts
    1,794

    Default

    yea will do about to start now.. hopefully it is fixable without too much of a dent in the pocket
    Life starts at 200km/h

  12. #12
    impulsesv6's Avatar
    impulsesv6 is offline Alloytec Garage
    Ride
    A quick Alloytec

    Join Date
    Dec 2006
    Location
    brisbane, QUEENSLAND
    Posts
    682

  13. #13
    impulsive's Avatar
    impulsive is offline Alloytec Racing
    Ride
    VZ Alloytec

    Join Date
    Aug 2007
    Location
    Brisbane, QLD
    Posts
    1,794

    Default

    cover is off on the drivers side, the sound is definately there.. SOMEWHERE..
    Life starts at 200km/h

  14. #14
    impulsive's Avatar
    impulsive is offline Alloytec Racing
    Ride
    VZ Alloytec

    Join Date
    Aug 2007
    Location
    Brisbane, QLD
    Posts
    1,794

  15. #15
    andyman's Avatar
    andyman is offline The Only 6sp VZ Wagon
    Ride
    2012 BT50 4x4, 84 Hilux 4x4 & 05 Husky TE450

    Join Date
    Mar 2005
    Location
    Nowra, NSW
    Posts
    3,692

    Default

    hard to see in the pic, is all the lifters in the right spot, one hasnt fallen out? if you get a bar/ratchet and socket youll need 1/2 to get the leverage, turn the motor clockwise and see if you can here the sound?


    EASTERN CREEK JCNSW 2009

    Quote Originally Posted by Commydoor
    First of all your words cannot harm me cause my ego is like a shield of steel.

  16. #16
    andyman's Avatar
    andyman is offline The Only 6sp VZ Wagon
    Ride
    2012 BT50 4x4, 84 Hilux 4x4 & 05 Husky TE450

    Join Date
    Mar 2005
    Location
    Nowra, NSW
    Posts
    3,692

    Default

    or if you remove the starter relay and work out which pin is number 30 and which one is 87 off the diagram on the side of the relay, you can short that and it will crank the motor, see if you can hear where its comming from there


    EASTERN CREEK JCNSW 2009

    Quote Originally Posted by Commydoor
    First of all your words cannot harm me cause my ego is like a shield of steel.

  17. #17
    impulsive's Avatar
    impulsive is offline Alloytec Racing
    Ride
    VZ Alloytec

    Join Date
    Aug 2007
    Location
    Brisbane, QLD
    Posts
    1,794

    Default

    lol maybe u should come do that !! haha nah i turned the motor, i can def hear it coming from the rear of the inlet cam, and maybe center of the exhaust cam.. bit hard to tell to be honest
    Life starts at 200km/h

  18. #18
    impulsesv6's Avatar
    impulsesv6 is offline Alloytec Garage
    Ride
    A quick Alloytec

    Join Date
    Dec 2006
    Location
    brisbane, QUEENSLAND
    Posts
    682

    Default

    he can hear the sound when rotating the engine by hand... its coming from the intake cam from the rear...

    edit... haha remind me to bring the stethescope round on friday

  19. #19
    impulsesv6's Avatar
    impulsesv6 is offline Alloytec Garage
    Ride
    A quick Alloytec

    Join Date
    Dec 2006
    Location
    brisbane, QUEENSLAND
    Posts
    682

  20. #20
    impulsive's Avatar
    impulsive is offline Alloytec Racing
    Ride
    VZ Alloytec

    Join Date
    Aug 2007
    Location
    Brisbane, QLD
    Posts
    1,794

    Default

    hopefully i can diagnose the problem and have it fixed as soon as possible, i might be looking at a loan tommorow..
    Life starts at 200km/h

  21. #21
    andyman's Avatar
    andyman is offline The Only 6sp VZ Wagon
    Ride
    2012 BT50 4x4, 84 Hilux 4x4 & 05 Husky TE450

    Join Date
    Mar 2005
    Location
    Nowra, NSW
    Posts
    3,692

    Default

    did big daddy cool tune your car by any chance haha, maybe because of the extreme amount of cam timing work he does, or did he remove your serpentine belt and advance the timing on the pulleys?............


    EASTERN CREEK JCNSW 2009

    Quote Originally Posted by Commydoor
    First of all your words cannot harm me cause my ego is like a shield of steel.

  22. #22
    impulsive's Avatar
    impulsive is offline Alloytec Racing
    Ride
    VZ Alloytec

    Join Date
    Aug 2007
    Location
    Brisbane, QLD
    Posts
    1,794

    Default

    sussed out a bit further.. with the ears of my partner it apparently is coming from the front of the inlet cam.. and has several taps in several places
    Life starts at 200km/h

  23. #23
    andyman's Avatar
    andyman is offline The Only 6sp VZ Wagon
    Ride
    2012 BT50 4x4, 84 Hilux 4x4 & 05 Husky TE450

    Join Date
    Mar 2005
    Location
    Nowra, NSW
    Posts
    3,692

    Default

    id suspect vvt actuator possibly then, is there any fault codes up?


    EASTERN CREEK JCNSW 2009

    Quote Originally Posted by Commydoor
    First of all your words cannot harm me cause my ego is like a shield of steel.

  24. #24
    06vzcalais is offline Donating Member

    Join Date
    Aug 2009
    Posts
    327

    Default

    Quote Originally Posted by impulsive View Post
    Here is a short video link, hopefully you can hear the tapping noise

    YouTube - DSCF7800.AVI

    have been told it is cam related or the buckets
    nothing like i imagined sorry for missleading info

  25. #25
    impulsive's Avatar
    impulsive is offline Alloytec Racing
    Ride
    VZ Alloytec

    Join Date
    Aug 2007
    Location
    Brisbane, QLD
    Posts
    1,794

    Default

    Quote Originally Posted by 06vzcalais View Post
    nothing like i imagined sorry for missleading info
    All good mate (Y) hopefully i have it sussed tommorow, have a mechanic coming for a look. If not should be sorted by friday (hopefully). If it can not be pinned by then it will be in the workshop and getting fixed.

    Might be looking at a few different things while its off the road.. Stay tuned!
    Life starts at 200km/h

Page 1 of 2 12 LastLast

Similar Threads

  1. Whats your opinion?
    By akust0m in forum General
    Replies: 4
    Last Post: 27-08-2009, 06:36 PM
  2. Is SUMMERNATS Slowly Dying - Whats Your Opinion
    By VNCalais3800 in forum The Pub
    Replies: 23
    Last Post: 22-06-2009, 08:32 PM
  3. Whats your opinion on this?
    By VL_5SPEED in forum General
    Replies: 11
    Last Post: 25-07-2008, 09:06 PM
  4. Whats your opinion
    By executive_power in forum The Pub
    Replies: 2
    Last Post: 20-08-2006, 10:56 PM
  5. Tapping from alloytec 190 motor
    By Walks_SV6 in forum VZ Holden Commodore (2004 - 2006)
    Replies: 12
    Last Post: 15-05-2006, 03:03 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72