I've found the cheapest place for holden keys!

[mainpath]

Hello all,

I thought I would share some very valuable information with you all.
If your in sydney then THESE people are the best. It cost $69 for a 3 button key inc cutting, looks great, exactly the same as what came from factory.
They don't need your car to cut it but need it to program it, I had to program mine because i didn't have the car with me.

Program Key method;

1. Open car with old keys
2. turn on car with new keys (leave on for 20 sec)
3. turn off car, locks door to make sure it's all working.

The level of service is very good and I would recommend them to anyone.

[-scyth-]

Program Key method;

1. Open car with old keys
2. turn on car with new keys (leave on for 20 sec)
3. turn off car, locks door to make sure it's all working.

Really? does this work for the VZ? i was always under the impression that a TECH 2 was needed...

[mainpath]

Nope i have a 04 VZ worked fine, and before anyone asks no i don't work for the company lol.
I'm using my key to start the car just fine.

The guy said to me that they have the cheapest prices anywhere for these keys, they do other brands as well.

[-scyth-]

Cool, interesting info. thanks.

[colgf]

Not entirely correct!!! This method only works for the FIRST reprogrammed replacement key. ( So if you lose one or need a replacement , once it is cut & has a new head it will only program that first key into the BCM using that method ) . The BCM "Remembers" it has programmed "one" replacement key & will not allow any more unless Tech2 OR a Locksmith's programmer (plugged into the diagnostic connector to "Talk" to the BCM. Its like that to safeguard the vehicle against theft , say, if someone wanted another 2 sets of keys, at once.

[mainpath]

Yep okay i didn't know that, kinda stupid through ?
Well i know they have tech2 available at the store so no biggie.

[spiroshome]

Commodore keys for $75 complete cut and programmed.
Most transponder keys $75

my cobbler
shop 7/348 mountain highway,
wantirna
melbourne
victoria 3152

holden vr - vz $75
toyota $75
ford au2 - bf $75
nissan/ subaru $75
mazda $75
kia / hyundai $110
lexus $75

tel : 03 97293793
0431 251 551

[Sean880]

Hello all,

I thought I would share some very valuable information with you all.
If your in sydney then THESE people are the best. It cost $69 for a 3 button key inc cutting, looks great, exactly the same as what came from factory.
They don't need your car to cut it but need it to program it, I had to program mine because i didn't have the car with me.

The level of service is very good and I would recommend them to anyone.

Thanks for the reference. Very helpful .