why wont the service remidner reset

[alex2_s]

as the title says...... it gets to the "awaiting confirmation" screen however holding the Set button doesn't do anything... or any other combination of buttons.... (75k service, VZ SV6)

[richardpalinkas]

i think when the screen says service reset, hold the set button then

[rabs]

some times they will not reset if the car has a code set in the computer, that way it makes you go to the dealership to get it fixed. But most likely it could be a problem with your buttons. The other way to reset them is with a tech 2 at the holden dealership. Just to make sure, you hold down the 2 arrows and turn on the ignition, the car will beep, then push and hold the set button, it will then beep again to let you know it has been cleared. Hope this helps

[alex2_s]

Yeah rabs that's the method i'm using... I think there might be a code stored actually that could be on the money.... ta....

[wikky]

If you look in your car's manual it tells you there.

[JST-23Z]

1 press and hold the 2 arrows
2 turn the ignition on
3 wait for a beep
4 then press set (it will beep again)
5 then press and hold the arrows again