VZ ssl front springs + 20inch wheels?

[JShaw]

Hi guys, im picking up some 20inch wheels on the weekend and wanted to ask about scrubbing issues on the front if you have ssl springs installed? I have sl in the front ATM but wanted to know if I would run into any problems if I decided to drop the front any more, I know lots of people here have 20s with ssl on the front, so did anyone have any scrubbing or wheel lock issues? Thanks

[JShaw]

If any consolation, it's an executive (I don't like the front appearing so high due to the shortness of the front bar)

[bludeck]

Try the 20's with the SL's you have and see how u like it, wouldnt advise any lower due to ride quality. Full lock turning will rub, go up or over somthing and it will be worse.
You could always change the front bar

[JShaw]

true, thats what im gonna try, i mean ultimately its just a cosmetic thing in my opinion, but im very picky, hahaha

[CAPRILICIOUS WL]

U may have to roll your guards if your rims are x8.5 or more wide.
I have 20s with 245/35 Tyres and they didn't scrub because the wheel was x8 wide.
However with the same Tyres when I got my other 20" rims they where x8.5 I had to get the guards rolled.

Hope I have helped a lil.

[JShaw]

U may have to roll your guards if your rims are x8.5 or more wide.
I have 20s with 245/35 Tyres and they didn't scrub because the wheel was x8 wide.
However with the same Tyres when I got my other 20" rims they where x8.5 I had to get the guards rolled.

Hope I have helped a lil.

yeah these are 20x8's on 225's hahaha so should be alright

[[CCRUZN]]

yeh ssl with 225/35R20 doesnt rub on mine