L76 cam

[Harris]

Here is a link for a cam i want to put in my VZ SS 06. Would anyone be able to tell me for sure that it has everything i need for a L76 engine? (http://www.precisionintl.com/online/...x?CID=41223219). It needs to be suited for boost. (Is high lift good for that?), Is it true the l76 has L92 heads? Does it have a 3 bolt cam? Also has anyone got a video of a car with a cam like this one??

[Harris]

Need to no if my standed push rods will work with this cam? Have ordered the cam. Can anyone tell me if i need new push rods?????

[Munz]

link goes to site but no cam info

pretty sure L76 is single bolt and you will want new pushrods but best to measure once cam is in

[Harris]

http://www.precisionintl.com/online/...x?CID=42357834. Hopefully this works better. Is there anyway you can tell me with the specs so i can order the parts before i pull the engine down?? Also I got a 3 bolt cam but can always change cam gear of its wrong.

[Munz]

Usually you look for lift of a cam when talking NA engines but with boost the air is compressed so its not as necessary. But you say you've ordered this I would be talking to an engine builder or someone more in the know as I don't think it would be suitable for boost but I could be wrong

Also yes the L76 run the square port L92 heads
I think you may need to run a VVT delete kit to run an aftermarket cam aswell

[Harris]

yer iv ordered the dod delete kit with the cam. All duration numbers, valve lift numbers and revs for the cam are the same so should be good for boost i hope. For the push rods guess ill just have to check when it starts going back together, if there going to be the right length. cheers for the help