routier1642
Member
- Joined
- Feb 19, 2014
- Messages
- 320
- Reaction score
- 3
- Points
- 18
- Age
- 64
- Location
- Australia
- Members Ride
- 2005 Adventra LX6
I recently obtained a VZ sump guard from 4Blok for my VZ Adventra.
It's pretty thin (1mm) galvo, but it was cheap and I mainly wanted it to help clean up the under-body airflow, so no problem.
I also figured I could use it as a template if I needed to get a heavier one made.
Holden Commodore VT VX VY VZ Galvanized Sump Guard Bash Plate M | eBay
The question is, how to fit it?
I did a dry run & it looks like 4 holes line up, the 2 biggest with grooves/rails under the engine.
I think I need 2 t-bolts (never used these before), and a couple of other bolts, but have no idea what size to get.
I'd try to measure the holes, but I'm not very mechanical & will probably stuff it up.
Can anyone advise?
It's pretty thin (1mm) galvo, but it was cheap and I mainly wanted it to help clean up the under-body airflow, so no problem.
I also figured I could use it as a template if I needed to get a heavier one made.
Holden Commodore VT VX VY VZ Galvanized Sump Guard Bash Plate M | eBay
The question is, how to fit it?
I did a dry run & it looks like 4 holes line up, the 2 biggest with grooves/rails under the engine.
I think I need 2 t-bolts (never used these before), and a couple of other bolts, but have no idea what size to get.
I'd try to measure the holes, but I'm not very mechanical & will probably stuff it up.
Can anyone advise?