kaid
New Member
- Joined
- Jan 14, 2015
- Messages
- 1
- Reaction score
- 0
- Points
- 0
- Location
- Sunshine Coast
- Members Ride
- VZ SSVZ 5.7 V8 Ute
Hi All
This week my indicator fuse in my ute blew and I have traced it down to the point of whenever you put it into reverse there is a short straight to ground with the tail light assy plugs disconnected at the back end.
My question is has anyone come across a particular point where the wiring loom has chafed through before?
Also I can't seem to find a wiring diagram or a schematic to show if and where there are any other connectors in the harness between the fuse panel and the tail lights just so I can disconnect them for troubleshooting purposes.....
So if any one can shed any light on either particular subject that would be much appreciated.
Cheers Kai
This week my indicator fuse in my ute blew and I have traced it down to the point of whenever you put it into reverse there is a short straight to ground with the tail light assy plugs disconnected at the back end.
My question is has anyone come across a particular point where the wiring loom has chafed through before?
Also I can't seem to find a wiring diagram or a schematic to show if and where there are any other connectors in the harness between the fuse panel and the tail lights just so I can disconnect them for troubleshooting purposes.....
So if any one can shed any light on either particular subject that would be much appreciated.
Cheers Kai