Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Drivers Door Locking Issue

Vegemite

New Member
Joined
Nov 17, 2014
Messages
44
Reaction score
0
Points
0
Location
Melbourne
Members Ride
2006 VZ Calais
When I unlock my car my drivers door does not unlock properly. The door lock inside the car pops up but it doesnt pop up far enough for me to be able to open the door from the outside. If I go in from the backseat and pull up the lock the door will now open. Anyway to fix this issue?
 

ozNick

Well-Known Member
Joined
Dec 15, 2014
Messages
311
Reaction score
421
Points
63
Location
Canberra
Members Ride
VL Berlina 3.0 Auto
Have had the issue intermittently.
In my case only seems to happen when it is hot. No fix I am aware of.
 

Vegemite

New Member
Joined
Nov 17, 2014
Messages
44
Reaction score
0
Points
0
Location
Melbourne
Members Ride
2006 VZ Calais
it happens sometimes and goes away. Its really annoying and want to stop it from happening all together.
 

dgp

Well-Known Member
Joined
Jan 1, 2011
Messages
1,462
Reaction score
571
Points
113
Location
Victoria
Members Ride
VF II SSV Redline
Your door lock actuator needs to be replaced. About $80 from Holden and a couple of hours of your time stuffing around.
 

rambunctious

Well-Known Member
Joined
Jun 9, 2011
Messages
2,374
Reaction score
2,279
Points
113
Location
Alexandra Headland Qld
Members Ride
VZ Executive Wagon
Your door lock actuator needs to be replaced. About $80 from Holden and a couple of hours of your time stuffing around.

Hmmm, I had the problem on 2 VZ's so I sprayed the buttons with Silicone Spray and no further problem so far.

I did notice it was usually during wet weather.
 

BIG_JV

Member
Joined
Jul 28, 2011
Messages
53
Reaction score
7
Points
8
Location
Australia
Members Ride
VZ Wagon
I did notice it was usually during wet weather.

I think the humidity causes gunk accumulated in and around the actuator to stick. I cleaned around the actuator and tried spraying some WD40 in the bit that pops up and it seemed to work, hasn't stuck since
 
Top