Vz crewman - what seats will fit

[M.morgz]

I'm searching for a drivers seat and trim to fit my vz crewman which in my town is proving difficult. Thought it'd help if I knew what other model seats would fit. First to admit I'm pretty clueless when it comes to cars so thought I'd ask here. Cheers

 

[figjam]

Don’t know if you mean that the fabric trim, or the foam is stuffed.
I think you will be scratching to find similar trim, but if you can get a good seat foam from a wrecker, (VT > VZ) a motor trimmer should be able to swap the trim and foam onto your base.

 

[diysv6]

The foam seat insert in my VZ SV6 cracked along the length of the "bolster".

Bought a new foam seat block for about $120 from Holden. Removed the seat and replaced the foam seat.


Came up really well.
The problem I have is that the fabric covering the seat and rear seat section have become a bit worn. These covers were about $220 or more per piece to restore to original.

Bought some seat covers from an aftermarket supplier - about $70-$80 for both front seats.
They look OK and do the job for an 11 year old car.